How many of you use sabots with your black powders on here? Or would want to if you could?. Somthing keeps popping up over the years for me to try it. The Americans seem to rave about it
Cheers
How many of you use sabots with your black powders on here? Or would want to if you could?. Somthing keeps popping up over the years for me to try it. The Americans seem to rave about it
Cheers
The Americans and others use saboted bullets - not ball - in a particular type of BP firearm, the in-line rifle/carbine. The use of a sabot enables you to shoot a nitro-type bullet at fairly high velocities from a BP rifle that looks more or less exactly the same as a bolt-action nitro rifle. They are called in-line because they use a #209 shotgun primer on the head of a regular-looking bolt. Loose-loading CAN be done, but most in-line shooters use this kind of gun because they usually shoot them by inserting one- two or three 50gr Pyrodex pellets into the breech, rather than loose-load down the muzzle, like the usual muzzle-loader does. It is therefore very difficult to adjust loads, since so your load would be in multiples of 50gr - not ideal unless you are aiming to emulate nitro-loads in a BP rifle...hence the use of sabots. There is a very noticeable difference in shooting 2x50gr pellets and 3x50gr pellets or even, as some do, 4x50gr pellets. x 10
I've only ever seen one here in UK in .54cal, and the owner got rid of it as soon as he could, due to the lack of the Pyrodex pellets that the thing used. Quite what bullets he shot in it I don't know, but they must have been quite large.
The in-line is a way of shooting a BP rifle in the BP hunting season in the US and Canada that looks and feels just like your nitro centre-fire rifle. Some states even have a separate 'in-line' season of around seven to ten days.
Not my thing, I'm afraid...
What kind of gun are you keen to try this kind of load in?
tac
www.muzzleloadingforum.com
Hi Tac,
I like to experiment with most guns etc, wasent sure which had been tried and tested or if anyone had just had a play. Pulled the cover from my 3d printer and was looking at ball etc, as abs is easily cleaned from barrels was wondering what to try lol
I have used sabot in my 77/50 with 405gn .458 hard cast lead bullets and 60gn of BP. I didn't find any advantage, just a smaller hole in the target. I guess if you're after game and want to use a copper jacketed expanding bullet like they do in the USA, then it's the thing to do.
Personally I like the bigger hole from the Minnie as I can see it better in the white of the target.😊
Ah, you mean BREAK-barrel.
@OP - Do you shoot live game with it?
Do tell how you've explained to your FEO that you need expanding ammunition to shoot in a BP firearm.
tac
Last edited by tacfoley; 24-09-2015 at 06:57 PM.