Bsa R10 Mk2 .177, Theoben Evolution .177 CS800, TX200HC .177, HW100T .177 Bullpup, Airwolf MVT .177, Ray Neale Titanium JIm Vickers stock .177
What a nice pair, i like the tactical look for the HW and would take that route myself if the wood i am using turned out a bit naff, i am thinking about making a tactical stock from mahogany as its easy to work and painting it black, if the ash stock in the picture goes pear shaped then that could end up with a coat of paint,
maybe along the lines of the P90 they use on star gate.
Regards, Mark.
Love bullpups, and crosmans are sooo easy to adapt, I'm currently on my 4th modded Crosman and my first bullpup, bit rough and ready but it's good
http://i1317.photobucket.com/albums/...pskrdngsqd.jpg
Put wrong link up from photo bucket
Yeah it's 2240 hipac with 2 extensions, so it sits just short of the silencer adapter, I also have one on a 2250 with no extensions.
Iv never had any problems with them, I hear people saying not safe pressure etc etc, I have only ever filled to 1500 psi I haven't pinned the valve or anything like that and I get about 30-40 good strong shots on the 2240 and 10-15 on the 2250, I have a small cylinder 18cl from rap4 that I ise to fill the cylinder takes about 30 seconds so in one trip out I get about 120 shots with the 2240 at about 10ft/lbs
hi
i am also in the middle of making a pup out of my hw 100
its a laminate stock with walnut caps
hears what it looks like
https://flic.kr/p/uKwRwj
https://flic.kr/p/uMRApK
https://flic.kr/p/uvVF62
https://flic.kr/p/uegjbB
hope pic of trigger linkage may give you a different idea from the other pups shown in this thread
chris
Viking Mk2 .177/.22 bullpup, BSA Scorpion SE .177, BSA Scorpion .25 100M gun, BSA Scorpion .224 100fpe 100M gun,
Evanix Blizzard .257/.357 200M BR, Evanix Sniper X2 .45 at 270 fpe
Hi Chris, your gun looks really nice, its a bullpup that looks like a sporter very sleek fore end, can't wait to see it finished, the trigger linkage looks good too not too complicated, i was thinking of two cylinder bands with the trigger mounted between them doing away with the ali bar under the cylinder, as for my design its a bit different to yours, here's the latest pics.
Might have got a bit carried away.
Regards, Mark. By the way where you get the scope rail, looks good.
Last edited by buttloaves; 18-06-2015 at 09:36 AM.