Use lowest mounts as poss to reduce distance between ret and centre of bore
Use lowest mounts as poss to reduce distance between ret and centre of bore
A few nice rifles
He's running out of 'up', not running out of 'down'.
For shooting at long range, more scope height = less clicks of elevation required for a given distance... like lobbing a tennis ball over the net, you need a high line of sight to even see the POI... but then, you may be right, because more scope height requires more rear mount height in the first place... arrrrgh, my brain hurts!!
I also have a 6x24X56 Nighteater and have used it zeroed from 10 Yards to 50 without any problems with the elevation turret. I normally zero the rifle @ 30 yards and at 80 yards it just needs about 5 mil dot correction shooting JSB EXACTs 8.44 gr.
A.G
hi if your scope is shooting low try putting a small piece of packing on the rear of the scope so it lies on the rear mount then lay your scope on it.i have
had this problem in the past.i have found this works every time hope this helps you grev