Results 1 to 7 of 7

Thread: Help needed - air leaking out of "male" fitting on reservoir on Daystate cr94

  1. 23-07-2005, 09:09 PM #1
    ian0902 Guest

    Help needed - air leaking out of "male" fitting on reservoir on Daystate cr94

    I think the regulator might be doing odd things, when I charge the guns reservoir with 300 bar, the air slowly leaks out of the male - over the course of five minutes the guns reservoir empties...what should I do?

    Hope you can help

    Regards

    Ian
    Reply With Quote Reply With Quote
  2. 23-07-2005, 09:37 PM #2
    LESS THAN FORTUITOUS KENNETH
    LESS THAN FORTUITOUS KENNETH is offline Banned
    Join Date
    Sep 2004
    Location
    Barnsley
    Posts
    9,847
    Remove connector when empty and fit new seals / connector ?
    Reply With Quote Reply With Quote
  3. 23-07-2005, 09:40 PM #3
    Samantha
    Samantha is offline Registered User
    Join Date
    Mar 2003
    Location
    Southend on Sea
    Posts
    860
    Give Daystate a ring on Monday.
    Air Wolf, MCT, RWS 500, Daystate Mk3 Bullpup, Huntsman Mk2 Target Rifle, PH6, Anchutz, 7.62 Kongsberg, 7.92 Yugo Mauser and .22 Mauser.
    Reply With Quote Reply With Quote
  4. 23-07-2005, 09:50 PM #4
    Sportsmatch
    Sportsmatch is offline Registered User
    Join Date
    Jun 2003
    Location
    blackwood gwent wales
    Posts
    2,368
    its not rated to run at 300 bar if memory serves me right
    I filled mine to 200 bar only which give 110 shots I'd check the tube to see the swp limit
    sounds as the fill valve at the front is leaking you can try giving a sharp fill of air to see if it self seals
    Gary
    Last edited by Sportsmatch; 23-07-2005 at 09:53 PM.
    ISP Airstream mk3 March F 2.5/25mml. Sportsmatch GC2 mk3 leupold 20/50 Steyr 2014 hft March x 5/50 MTR3 ISP Airstream MK3 March x 8-80 silver, fx impact m3 element helix Ripley AR4 blue Burris 8/32 Steyr 2014 hot all .177
    Reply With Quote Reply With Quote
  5. 23-07-2005, 10:28 PM #5
    Shed tuner's Avatar
    Shed tuner
    Shed tuner is offline Registered User
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,434
    Quote Originally Posted by Sportsmatch
    its not rated to run at 300 bar if memory serves me right...I filled mine to 200 bar only
    Ditto, in fact I think it was 190 BAR
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
    Reply With Quote Reply With Quote
  6. 24-07-2005, 11:06 AM #6
    ian0902 Guest

    Sounds like a visit to Graham at litts may be in order

    Thanks all for the help on this...

    Regards

    Ian
    Reply With Quote Reply With Quote
  7. 24-07-2005, 03:46 PM #7
    Road Runner
    Road Runner is offline Registered User
    Join Date
    Nov 2002
    Location
    Plymouth
    Posts
    1,175
    My CRX has "SWP 3000" engraved on the action. That is 206 bar. The CR94 is a fair bit older - before 300 bar came into airgunning, I think. I would be very careful what you are doing there.

    Keith
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Daystate CR94 into "Sporter" stock
    By ian0902 in forum General Airgun.
    Replies: 3
    Last Post: 05-08-2005, 09:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules