Comparator size

[Gramps]

I need a 6mm/243" bush to fit my Stoney Point Comparator.

Neither the distributor nor my local shop has one so I'm going to have to make one.

Can anyone give me the bore size on the bush for 6mm please?

[salmo]

Pick a diameter somewhere on the ogive, it doesn't have to be an exact size, its just a comparator. You could have 2 comparators with different hole sizes and if used singularly would both do the exact same job. You could even use a .204 or .224 one if you have it as you are just picking up on a reference point, there is no spec as to exactly where this reference point should be on the ogive so there is no exact/definitive hole size for this.

[Treebone]

As salmo says its a comparator not a measuring device so the exact size does not matter.

TB.