Are you filling from a 300 bar bottle? If so you will require an adapter as the bottle fittings are different depths.
I bought my LP2 new from Steyr UK, via Edinkillie Sports. Am I right in saying that the supplied filling adaptor is too short for a standard DIN air cylinder valve? The adaptor that came with the pistol is about 10mm short of mating with the valve's bottom face so the air is lost through the hole in the valve thread.
Do I now have to buy the longer one from Best Fittings?
Thanks
I71
Are you filling from a 300 bar bottle? If so you will require an adapter as the bottle fittings are different depths.
I am filling from a 300bar cylinder.
Where can I get such an adaptor?
Ta.
Best Fittings should have one. Its just a 1/4" washer with 'O' ring.
As if by magic - http://www.bestfittings.co.uk/shopexd.asp?id=637&bc=no
Founder & ex secretary of Rivington Riflemen.
www.rivington-riflemen.uk
I machined a 1/4" washer from nylon and it does the job fine, although £4.50 for a Best fittings adaptor ain't exactly extortionate
Steyr LP10, Steyr LP5,
Vintage Collection - Walther LP53, HW77k Venom, BSF S20 Match, Original 35, ASI Target plus lots more
A 0.5 inch tap or hose washer backed by a thin steel washer is an acceptable temporary solution as a spacer between the Steyr 232 bar adaptor and your air tank.
A 300 bar connection has 3 or 4 more threads than a 232 bar; that's why the air escapes; the depth of the two fittings is different.
Pm me if you need further help.
ATB
Mike.
Nowhere to go ........in no hurry to get there; www.rivington-riflemen.uk----- well I suppose it is somewhere to go.... founded by I.J. - let down by the tainted blood scandal
Have one or two spare if you don't get sorted by the weekend.
This catches loads of people out. ;0)
Thanks gents.
I've ordered one of these from Best Fittings:
Steyr LP (Pistol) - 1/8 BSP Male Fill Adaptor
03S2-ML03
It's the same as the Steyr adaptor but with longer thread for a 300bar cylinder valve.