Stock re finish

[NickG]

Who is the best to refinish a tx stock, I want it as near original finish as possible

[sharpsman]

the beech stocks are laquered and the walnut is an oiled finish, so totaly different if you want it original

[tbone]

the beech stocks are laquered and the walnut is an oiled finish, so totaly different if you want it original

Exactly what he said.
If you can't do it or don't want to have a go just pop round to a local re-finisher/ furniture repair shop.
If you want it to look new you could buy a stock from one of the lads who have replaced with a custom stock.

[NickG]

I got hold of a tatty, repaired stock, and have added an adjustable cheek piece , I would like it re finished , its beech

[Rickenbacker]

Tinted lacquer Nick. Sprayed on.

[sharpsman]

There is plenty of advise on finishing beech stocks on here - if you can fit an adjustable cheack piece it should be straight forward and a lot cheaper for you

[tbone]

I got hold of a tatty, repaired stock, and have added an adjustable cheek piece , I would like it re finished , its beech

Hello Nick
If you are going to have a go there is some good clips on you tube. why not have a go, what have you got to loose ?.
I am not sure what you know and would not want to offend you.
Beach is a very light colour so the factory use a tinted lacquer that is sprayed onto the stock.
Basically it is coloured varnish in simple terms.
Has the stock got anything on it or has it been striped back.

[NickG]

J have spraying gear as used to spray my own cars , so I am ok with finishing things , problem is two pack, is it still toxic, and where will I get the correct tinted lacquer ?