Webley Breech Washers

[Troubledshooter]

I have a quantity of original 'Nitrile' breach washers for the Webley Junior, Senior & Mk.1.
These are available @ £3.60 posted to addresses within the UK.
Extra washers in the same order after the first one, up to 10, are priced @£3.00.
Please indicate on this thread if you want any, then contact by PM for payment details. Online bank transfer is my preferred method of payment, but Paypal is acceptable as long as any charges are paid up front

[Troubledshooter]

Once more into the breech. (Sorry about the previous incorrect spelling. )

[Troubledshooter]

Elevate.

[Titan]

What is easiest and most efficient method of inserting the seal? There must be a knack?

Regards.....

....Titan

[Troubledshooter]

They are mostly difficult to insert, but a very small amount of lubrication can help. I have the original insertion tool as used for the brass and leather washers, but it's not a lot of help for the Nitrile version
They sometimes also require a slight trim of the face for the barrel to close properly, but care should be taken when this is done not to trim too much.

[Troubledshooter]

Elevate.

[paulwhite]

hi I have a Webley scott junior 177 made in Birmingham 4 are these what I need regards

[webman]

Yes, the rubber one will be OK for any Webley Junior. See above for fitting assistance.