Titan mpt - worth the wait?

[junglie]

I finally got one after waiting since they came out. After a quick service of the hammer mech & trigger it shoots beutifully,Felt gritty & hard to cock when I first got it but a good clean out & re-lube with dry-slide of the hammer tube & flushing the trigger cage with wd-40 & lube with sewing machine oil & it's one finger cocking & printing single hole groups @ 20yds.Can't wait tll the wind dies down to try it @ longer ranges.Feels a lot better balanced too with a little whitetail atop it now instead of the super moonlighter that weighed about a third of the gun & just looked so wrong on there.Hopefully I'll re-coup some of the cost when that's flogged with the tasco 3-9x50 AG that came with it too & end up with a bargain price mpt....good things come to those who wait.....;-)

[POK!]

I finally got one after waiting since they came out. After a quick service of the hammer mech & trigger it shoots beutifully,Felt gritty & hard to cock when I first got it but a good clean out & re-lube with dry-slide of the hammer tube & flushing the trigger cage with wd-40 & lube with sewing machine oil & it's one finger cocking & printing single hole groups @ 20yds.Can't wait tll the wind dies down to try it @ longer ranges.Feels a lot better balanced too with a little whitetail atop it now instead of the souper moonlighter that weighed about a third of the gun & just looked so wrong on there.Hopefully I'll re-coup some of the cost when thats flogged with the tasco 3-9x50 AG that came with it too & end up with a bargain price mpt....good things come to those who wait.....;-)

I have had a couple of Bearcats. Triggers aren't great and the thin barrel can occasionally be a problem but always very accurate. I have a reach forward OP BKL mount that's perfect for MPT. If you find you need such a mount I'll let you have it cheap.

[junglie]

I have had a couple of Bearcats. Triggers aren't great and the thin barrel can occasionally be a problem but always very accurate. I have a reach forward OP BKL mount that's perfect for MPT. If you find you need such a mount I'll let you have it cheap.

I may well take you up on that POK,is it medium or high, 1" or 30mm? I will be tuning the trigger when I get time, made a hell of a difference to my long action titan i had in the early 90's. I think those early 90's lothar barels are better than more recent ones too. But part of the trigger feel problem is because the blade is mounted upside down so has much less leverage to start with.

[POK!]

It's this one- http://www.bkltech.com/BKL-3-Long-Ca...-p/bkl-253.htm I think you would actually use it to reach back on an MPT mounted on the front rail.

[junglie]

It's this one- http://www.bkltech.com/BKL-3-Long-Ca...-p/bkl-253.htm I think you would actually use it to reach back on an MPT mounted on the front rail.

No thanks POk I've just found a simmons on the cupbourd with sportsmatch medium reach forewards on I can use if need be, thanks for the offer though.

[Rickenbacker]

MK1 or MK2 MPT?

Either way - Very nice...

I recently bought this scruffy Bearcat and modern equivalent, the little Brocock:

http://i662.photobucket.com/albums/u...pswthhhtxj.jpg

I suppose if I crushed them together and squinted, they'd be a bit like an MPT.

The Bearcat is now in bits for a reblue and rebuild, but it was running like a Swiss watch over the chrono, even though it was gummed up with old lube gone dry.

Everybody needs a Titan or Falcon somewhere in the cabinet...

BTW, I don't suppose anybody has a couple of BS208 o rings going spare?

[junglie]

MK1 or MK2 MPT?

Either way - Very nice...

I recently bought this scruffy Bearcat and modern equivalent, the little Brocock:

http://i662.photobucket.com/albums/u...pswthhhtxj.jpg

I suppose if I crushed them together and squinted, they'd be a bit like an MPT.

The Bearcat is now in bits for a reblue and rebuild, but it was running like a Swiss watch over the chrono, even though it was gummed up with old lube gone dry.

Everybody needs a Titan or Falcon somewhere in the cabinet...

BTW, I don't suppose anybody has a couple of BS208 o rings going spare?

Mk 1 I think but not sure what the differences are, it's very consistant on the chrono too 4-8 fps between shots with exact jumbo .22 straight from the tin. My early long action manitou sporter was a tack driver up to 40yds in .177. Try john bowkett for a scource of the o-rings?

[Rickenbacker]

Mk 1 I think but not sure what the differences are, it's very consistant on the chrono too 4-8 fps between shots with exact jumbo .22 straight fom the tin. My early long action manitou sporter was a tack driver up to 40yds in .177. Try john bowkett for a scource of the o-rings?

MK1 has separate loading bolt and cocking lever, like most Titans and Falcon FNs. While the MK2 MPT doesn't have the cocking lever because the bolt cocks the hammer as well.

Aye, I expect JB has some BS208 o rings. It's a standard size, I just don't have that size right now.

[gedfinn 2]

I finally got one after waiting since they came out. After a quick service of the hammer mech & trigger it shoots beutifully,Felt gritty & hard to cock when I first got it but a good clean out & re-lube with dry-slide of the hammer tube & flushing the trigger cage with wd-40 & lube with sewing machine oil & it's one finger cocking & printing single hole groups @ 20yds.Can't wait tll the wind dies down to try it @ longer ranges.Feels a lot better balanced too with a little whitetail atop it now instead of the souper moonlighter that weighed about a third of the gun & just looked so wrong on there.Hopefully I'll re-coup some of the cost when thats flogged with the tasco 3-9x50 AG that came with it too & end up with a bargain price mpt....good things come to those who wait.....;-)

Hi, nice gun,
Is it a repeater , This one is in .22.

http://i101.photobucket.com/albums/m...&1456229066996

[junglie]

Hi, nice gun,
Is it a repeater , This one is in .22.

http://i101.photobucket.com/albums/m...&1456229066996

It's a single shot, not keen on the falcon mag system at all me.