6mm BR Norma Case Trimming

[Pengo]

Good evening everybody.

I need to find a case trimmer/case length gauge for my 6mmBR Norma cases and wondered if anyone can shed any light on where/what I should be looking for, please?

I've got the usual LEE Reloading bits for my other calibres, but cannot seem to find anything in 6BR Norma.

As I now cannot reload anything until I get them trimmed back, I would appreciate any help.

Many thanks

Paul

[JB101]

Wilson do one and as quick to use if not quicker than a lot of other makes .

Regards
James

[zx10mike]

wilson trimmer. not cheap but v good

[ratshot5]

wilson

[kindwarf]

Good evening everybody.

I need to find a case trimmer/case length gauge for my 6mmBR Norma cases and wondered if anyone can shed any light on where/what I should be looking for, please?

I've got the usual LEE Reloading bits for my other calibres, but cannot seem to find anything in 6BR Norma.

As I now cannot reload anything until I get them trimmed back, I would appreciate any help.

Many thanks

Paul

My friend ordered a lee case trimmer in 6mm Br direct from lee in the states only cost a few quid, Other than that buy a standard case trimmer and use that.

[himself]

Good evening everybody.

I need to find a case trimmer/case length gauge for my 6mmBR Norma cases and wondered if anyone can shed any light on where/what I should be looking for, please?

I've got the usual LEE Reloading bits for my other calibres, but cannot seem to find anything in 6BR Norma.

As I now cannot reload anything until I get them trimmed back, I would appreciate any help.

Many thanks

Paul

Hi Paul.
I use a kwik Trimmer ,supplied By Reloading Services. It is a tube with a cutter inside,the cutter can be adjusted for length by moving it up/down the tube ,it locks to length with a grub screw locking system. John F

[Pengo]

Thanks everybody for your input.

I've decided to push the boat out and have bought a Lyman UNIVERSAL TRIMMER w/CARBIDE CUTTER & 9 PILOTS, so hopefully this should keep me out of mischief for a while.....

Cheers. Paul