Results 1 to 3 of 3

Thread: Load data for 6.5x55 SE, 95 gr v-max and BL(C)-2 anyone?

  1. #1
    Join Date
    Jan 2013
    Location
    Devizes
    Posts
    5,031

    Load data for 6.5x55 SE, 95 gr v-max and BL(C)-2 anyone?

    As title I can find data for 100 gr and 85 gr but nothing in between, picked up a cheap tub of the powder so want to use it but option would be N140.

    Cheers
    Thanks for looking

  2. #2
    Randy Bohannon's Avatar
    Randy Bohannon is offline “Junes1 is a whining bellend”
    Join Date
    Jan 2007
    Location
    London
    Posts
    28,522
    The hundred grain data should be usable and almost identical.

    The difference in bullet weight is only five percent and whilst in principle you could use a bit more of the same powder with a slightly lighter bullet of the same construction; this margin will be smaller than the inherent effect of your particular barrel and chamber on the charge weight anyway.
    "An infinite number of monkeys banging away at type writers for an infinite period of time will eventually reproduce Hamlet" Thanks to discussion forums we now know this to be untrue.

  3. #3
    Join Date
    Jan 2013
    Location
    Devizes
    Posts
    5,031
    Quote Originally Posted by Winona Wu View Post
    The hundred grain data should be usable and almost identical.

    The difference in bullet weight is only five percent and whilst in principle you could use a bit more of the same powder with a slightly lighter bullet of the same construction; this margin will be smaller than the inherent effect of your particular barrel and chamber on the charge weight anyway.
    Thanks Winnie, was aware I could use the 100 gr data just wondered if anyone else had used this combo and also what length they were using as its quite a short bullet for calibre.
    Thanks for looking

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •