-
press timing
bought a s/h lee pro 1000,seems to have a timing prob on first pull on the handle it turns to the next station as should ,on second pull it stop short,like its only doing half a turn,
then does a full turn then half,then does a full turn then half and so on
ballkeeper
-
Odd. Have you adjusted the timing screw as per the manual? Is the handle moving the same distance each time? Have you checked the condition of the hex ratchet parts?
Thinking about it more, I'd put fair money on the hex ratchet being the cause.
Last edited by zanes; 09-05-2016 at 09:43 AM.
-
yup done the screw adjustment ,yup order 2 pkt of the hex rachet hopefully that will sort it,cheers
ballkeeper
-
well the ratchet bits came ,but still not working properly ,
think this maybe the part needed ,but where to get it
http://leeprecision.com/drive-blt-watch-.125.html
might just get this any one got one
LEE PRO CARRIER NO.1 COMPLETE
Last edited by gtpkeeper; 12-05-2016 at 11:20 AM.
ballkeeper
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules