Reply With QuoteIf it's under two years old I'd speak to air arms, though if not I'd still speak to them 1st. All my Pcp's go to Dave mercer in farnworth near Bolton. He services guns for many dealers in the country, top bloke and no silly prices.
Registered User
After doing a few shot strings through a chrono, my airarms 510 is running very erratic.
Jumping in the sweet spot from around 10.30 to around 11.90 ftlb
Who is recommended to put this right ?
Thanks
Registered User
If it's under two years old I'd speak to air arms, though if not I'd still speak to them 1st. All my Pcp's go to Dave mercer in farnworth near Bolton. He services guns for many dealers in the country, top bloke and no silly prices.
Registered User
Air arms after care is piss poor I have emailed them three times and not once have they replied
Hung like a Smurf !
In the past everytime I contacted Air Arms, I always found them very helpful. However the last time I emailed them I got no replyOriginally Posted by KeithS
Exceedingly Good Bloke
Phone them...sorted
BBF
"The grass is always greener on the other side"
Cooee! Chase me you naughty boys!
I have phoned AA a couple of times and they awesome on the phone.
Nothing like Theoben!
Master Debater
I may only have 5 but I have the best 5
If you have no luck with Air Arms try Airmasters 88 (Dave Welham) he is just the other side of Dunstable so nice and local
Pete
Pete
Registered User
Its probably the hammer rail in need of a clean. Pre AT on S400 (basically the same action) its an easy diy job, bout no doubt slightly more involved for your gun. If you are brave and practical do it yourself. There are certainly guides online for the similar s410. Google it.
Otherwise there may be an AA service agent in your area.
I've always found AA helpful and more. Give them a call.
Posting Permissions