Hi all,
Trying to help a buddy out ...
Been to the indoor range with him tonight ...with his new HW110 (.177)
After three hours, three separate shooters, a range of pellets, silencer on, silencer off, all screws nipped / checked, scope off a
previous rifle (working no issues) .....
Cannot get this rifle to group consistently.
May get three shots same hole ...then one low left 30mm away...then one high right 20mm away then one online but low 30mm away...
no consistency at all ....not what any of expected from a weihrauch !
Both magazines gave similar poor results.
One thing we did notice .....(not the HW100) ....the barrel band...it houses a grub screw either side at 20 to and 20 past the hour position....
one was sitting slightly out ...maybe touching the barrel ... the other not out at all
which raised questions.
Why are they there ... unlike the 100(rubber insert to the barrel band)
Should they nip onto the barrel ??
Should the barrel float and not touch or be touched by these....
Are they an after thought to combat something ?
If anyone can help with either help for these grub screws ...
or is this a Friday rifle ?? or is anyone else experiencing the same ??
We are all quite surprised and disappointed ....
It looks to be going back to the shop !!