Reply With QuoteI can honestly say I've never seen anything like it.Originally Posted by cooksey13
Some pictures may help.
All the best Mick
Fully Grown Member
Just picked up a much abused bsa meteor mk3 in a split mk1 stock! It looks as if its been stood in a damp place with a good deal of rust! Now my questions are has anyone else seen such an odd hybrid? Does anyone have a cocking lever? And would people reblue it or just spray black?
gamo hunter 440 .22 smk b3 crosman 2260 and 2240
Administrator
I can honestly say I've never seen anything like it.
Some pictures may help.
All the best Mick
Fully Grown Member
Some pictures would be avalibe but don't know how to upload!
gamo hunter 440 .22 smk b3 crosman 2260 and 2240
Administrator
Ah :-
http://www.airgunbbs.com/showthread....s-onto-the-BBS
If all else fails I'm sure someone will host them for you.
All the best Mick
Fully Grown Member
Thanks will try again! Later have already started the stock repairs
gamo hunter 440 .22 smk b3 crosman 2260 and 2240
Fully Grown Member
Pictures as promised
http://i1378.photobucket.com/albums/...psut1xi9gu.jpg
gamo hunter 440 .22 smk b3 crosman 2260 and 2240
Makes Scrooge look Happy and Generous!
Comes up 'Error - photobucket' for me!
ASM
Brexit voter and proud British citizen (once more)
The E.U. is built on pure Poopenshtinken!
I am a Man of La Northumberlandia, a true Knight and spend my days on my Quest (my duty nay privilege!) and fighting dragons and unbeatable foe, to right the unrightable wrongs, to bear with unbearable sorrow and dreaming my impossible dreams.
Fully Grown Member
gamo hunter 440 .22 smk b3 crosman 2260 and 2240
I Like Gingers Best
Yep, that works.
Have any alterations been done to fit mk3 action in mk1 stock?...only difference I can think of is the trigger guard /rear action screw is around t'other way on the mk1...
blah blah
Fully Grown Member
No alterations as far as I can tell but as you may of seen the stock is a bit damaged so unable to tell tell yet
gamo hunter 440 .22 smk b3 crosman 2260 and 2240
Registered User
I have a MK5 .177 which has a plastic plate on the butt-is this normal? It has holes in the barrel for the rear sight but the sights are on the rear of the scope rail. In total I have 5 Meteors but this one looks really slender and rather different.
I Like Gingers Best
...yeah, did notice that. Good luck with it
Think there was a version of the Meteor made for army cadets and scouts...sure it had the rear sight fitted back along the scope rail? ..and may have had a little diopter sight that fixed to the top of the standard rearsight?...perhaps yours is one of those guns?
blah blah
Fully Grown Member
The stock is back together!
Now it had previously been screwed into position do I leave the horrible miss matched semi rounded screws remove them all together or use brass ones so it shows its been repaired?
Also other than evil bay John knibbs and chambers does anyone know of a cocking arm and pin for it?
gamo hunter 440 .22 smk b3 crosman 2260 and 2240
I Like Gingers Best
I have a mk1 Meteor stock (no cracks, split or rot, but could do with scraping and refinishing) and an almost complete action with all trigger bits, piston, spring, etc. even has the breech block and cocking link. The only things missing are the barrel and sights...you can have it for £20 plus postage if it's any good to you?...all you would have to do is use the barrel on your present gun...
pic here: http://i774.photobucket.com/albums/y...ps3da16d3e.jpg
Remember, barrel is not included...barrel actually snapped off the brazed joint and was used in another project.
blah blah
Fully Grown Member
Tempting!
gamo hunter 440 .22 smk b3 crosman 2260 and 2240
Posting Permissions
