Results 1 to 15 of 15

Thread: Wildcat Evolution Moderator review

  1. #1
    Join Date
    Jan 2006
    Location
    Sunderland
    Posts
    3,852

    Post Wildcat Evolution Moderator review

    The Wildcat Evolution moderator.......

    How good are these mods?

    Frankly I was blown away when I first tested the .17 cal version on my 17 Rem! I had an early DM80 which I had on my first .17 Rem. This DM80 always impressed me along with the others shooters who shot with me. Many bought DM80’s on the strength of that. I sold that particular 17 Rem and the DM80 mod along with it. Of late I rekindled the 17 cal CF flame and bought another. I have been running a CQB (which is shared with my .223). I soon began to realise that with the .22 cal exit hole the CQB was struggling to moderate effectively…….so I did some digging around and checked out my best options for a quality 17 cal specific mod.
    I was told that the Evo was available in 17 calibre which immediately grabbed my attention because a couple of my friends have been running wildcat Evo's on their 20 cals so I was already aware how good these mods are. I took the plunge and ordered one in .17 cal.
    My initial impressions of the Evo mod were that it is not ‘military’ looking as many of the mods I've had such as my ASE Utra's, including my current CQB. Some have described the styling a little 'soft' or 'girly' but regardless of your thoughts on it they do have a modern appearance. The finish is very good with a lovely deep anodising on the latter half (baffle end) and a crinkle cut finish on the first half giving it a mat, soft appearance which I really like and has been used on the Predator Series.
    As I have touched on the Evo mods are cal specific and is denoted by different coloured anodising on the baffle diffuser.
    The Evo is also a modular mod which is most useful if you wish to run it on multiple calibre's or if you wish to replace any parts should they wear or get damaged. It is very easy to strip with no tools required! I was able to switch between 17 and .22 in less than 2 minutes! It is always worth after a big session cracking the threads on the mod to prevent possible seizing, doing this with the mod warm will be easiest.

    Calibre specific options are a real bonus as it can make the difference between good and outstanding performance. A calibre specific option will always maximise the sound of moderation potential of any silencer as it has a greater ability to strip air as the bullet passes by the baffles thus reducing the blast (escaping air) at the final baffle.
    The Evo having 17 cal specific baffles was a real bonus as many moderator manufacturers don't go down to a 17 cal specific option.

    When I tested the Evo in the field against the CQB there was no competition! The Evo absolutely destroyed the CQB making the 17 Remington sound more like a 17 HMR! It even reduced the rifle recoil further which is impressive considering there is virtually non-anyway! I did expect it to be better considering that there is a distinct difference in the size of the exit holes but I was very impressed just how much better it was. After using the Evo I can't go back to the CQB now as I find it uncomfortable on my ears in comparison and I am very aware of the air burst from it.

    I was so impressed by the performance I ordered a .22 baffle stack to use it on my .223 and compare it to the CQB. Again I was blown away by the effectiveness of the Evo which cut down much more of the blast than the CQB. I now think of the CQB on my 223 as 'loud' even though it's not but relative to the Evo it is! The Evo's have spoilt me with respect to their sound moderating potential. They are also very light and feel very well balanced on the gun compared to muzzle cans. I have always been a fan of muzzle cans because they allow the barrel to remain cooler for longer when shooting consecutive rounds because they don't trap heat from the barrel insulating it from the cooler air outside but for the average shooter and hunter over-barrel moderators have a lot more potential to moderate sound which is clearly demonstrated by these Evo's.
    I’ve also tested an Evo against my very effective early DM80 over-barrel which has competed and beaten many of the top offerings including the ASE Utra Compact and SL7. We completed blind tests from 2 positions one of which was behind the firing line and the other in front. Both testers agreed that there was nothing to choose between them. The Evo had a slightly more piercing sound (if I was being critical) but not louder and this was only noticeable in front of the firing line. Considering the Evo is much smaller and lighter this is a very impressive outcome. Ideally for 6.5mm calibres you may wish to look at the larger Predator mods which silence bigger cals crazy well! I’ve heard my friend shooting his .284 with a P12 and it was similar if not possibly quieter than my 223 with the CQB fitted!!!

    I tracked down the prices for the sections/parts for your information:

    Coloured Diffuser insert for the Evo - £60.
    Bridge section - £60.
    Tube Set (this includes: outer tube, Inner tube with fixed back nut £60. Outer Baffle - £60
    Rear Bush - £10 (or £12 drilled to size)
    Postage costs:
    Rear bush - £1.75
    All other parts - £4.50

    So to sum up these Evo mods in a few ways they are light, strippable, versatile in that you can change calibres, very very effective sound moderators and a very reasonable price. What not to like? I’m in. J

    For more information contact:
    al@wildcatrifles.co.uk or messenger Alison Green

    Feel free to message me for further info on the test too.

    http://i165.photobucket.com/albums/u...psgmxibjda.jpg
    http://i165.photobucket.com/albums/u...pswwg2xaju.jpg
    http://i165.photobucket.com/albums/u...pse5gim7fu.jpg
    Precision Rifle Shooting
    Load Development Specialist
    https://m.facebook.com/prshooting/

  2. #2
    Join Date
    Jan 2008
    Location
    Mold (Yr Wyddgrug) N.Wales
    Posts
    18,250
    Hi Si, just speaking to Alison now to order one as the parts have come back form the anodizer. I agree these are superior mods abd the evo is step up. I can wait to fit it on the new pet project 6.5 x 47
    Rapid 7 / 10-22 ATN 2 Stiller Predator .204 Pulsar N970 Tikka T3 semi custom ATN MARS thermal.204 Tikka T3 Semi.223 Wylde IOR Operator Lawton 6mmBR Kahles Gen 3 - Stiller 6.5 x 47 Bushnell BDX - Winchester Red Performance SX3 12g

  3. #3
    Join Date
    Jan 2006
    Location
    Sunderland
    Posts
    3,852
    Quote Originally Posted by sidesy View Post
    Hi Si, just speaking to Alison now to order one as the parts have come back form the anodizer. I agree these are superior mods abd the evo is step up. I can wait to fit it on the new pet project 6.5 x 47
    Good choice on the cal Gary. It's sweet. Let us know how you get on with it.
    ATB
    Si
    Precision Rifle Shooting
    Load Development Specialist
    https://m.facebook.com/prshooting/

  4. #4
    Join Date
    Jan 2008
    Location
    Mold (Yr Wyddgrug) N.Wales
    Posts
    18,250
    Quote Originally Posted by Si-snipe View Post
    Good choice on the cal Gary. It's sweet. Let us know how you get on with it.
    ATB
    Si
    Will do pal, I've been so busy its just been sat in the cabinet (which is bloody criminal) Its needs the barrel running in....load developing and hopefully all will be good.
    Rapid 7 / 10-22 ATN 2 Stiller Predator .204 Pulsar N970 Tikka T3 semi custom ATN MARS thermal.204 Tikka T3 Semi.223 Wylde IOR Operator Lawton 6mmBR Kahles Gen 3 - Stiller 6.5 x 47 Bushnell BDX - Winchester Red Performance SX3 12g

  5. #5
    Join Date
    Jan 2006
    Location
    Sunderland
    Posts
    3,852
    Quote Originally Posted by sidesy View Post
    Will do pal, I've been so busy its just been sat in the cabinet (which is bloody criminal) Its needs the barrel running in....load developing and hopefully all will be good.
    What are you planning on shooting through it?
    Precision Rifle Shooting
    Load Development Specialist
    https://m.facebook.com/prshooting/

  6. #6
    Join Date
    Sep 2010
    Location
    Exeter
    Posts
    35,662
    I used to have a Wildcat evo mod on my first .22 Hornet, when I changed it for the "K" Hornet I was able to compare side by side with a DM80,
    I kept the DM, smaller, lighter & slightly quieter.

  7. #7
    Join Date
    Jan 2006
    Location
    Sunderland
    Posts
    3,852
    Quote Originally Posted by angrybear View Post
    I used to have a Wildcat evo mod on my first .22 Hornet, when I changed it for the "K" Hornet I was able to compare side by side with a DM80,
    I kept the DM, smaller, lighter & slightly quieter.
    Interesting. I did ask Dave for a test mod but he wasn't able to get one sorted due to work load. It was a shame as I would have loved to have compared it.
    Precision Rifle Shooting
    Load Development Specialist
    https://m.facebook.com/prshooting/

  8. #8
    Join Date
    Jan 2008
    Location
    Mold (Yr Wyddgrug) N.Wales
    Posts
    18,250
    Quote Originally Posted by Si-snipe View Post
    What are you planning on shooting through it?
    Hi, 120 grain Amax hopefully. I hope it likes them..as above i'm a big fan of Dave Mercers Mods.......
    Rapid 7 / 10-22 ATN 2 Stiller Predator .204 Pulsar N970 Tikka T3 semi custom ATN MARS thermal.204 Tikka T3 Semi.223 Wylde IOR Operator Lawton 6mmBR Kahles Gen 3 - Stiller 6.5 x 47 Bushnell BDX - Winchester Red Performance SX3 12g

  9. #9
    laity is offline Dumb “Platinum” Blonde
    Join Date
    Aug 2005
    Location
    Braintree...well near ish
    Posts
    3,374
    I swear by my Evo Mod's , I think pound for pound you just can't beat them . They are fantastic . I was shooting at Bisley with a friend of mine and he thought my gun was a .223 , much to his surprise it was my .308 . He was shocked . He shot it and then that was that , he was a convert ! They are priced so well and do a fantastic job . The reviews on these Mod's are without a doubt all fantastic and for a good reason .


    The customer service is a little bit good too ! Alison is lovely and brilliant to deal with .



    LAity
    Lots and lots of guns !

  10. #10
    Join Date
    Dec 2008
    Location
    Frith on the hills
    Posts
    2,150
    I have owned a CQB for years and always rated its performance as an excellent moderator for a 223 /222 cals

    Yesterday I had chance to compare the Sisnipe Evo and ASE CQB on a 223.

    The EVO is absolutely emphatically quieter that the CQB - It wasn't even a close call.

    The EVO takes away all the boom and even the higher pitched crack seems more muted.


    ATB
    Alan

  11. #11
    Join Date
    Nov 2009
    Location
    preston
    Posts
    3,710
    Quote Originally Posted by angrybear View Post
    I used to have a Wildcat evo mod on my first .22 Hornet, when I changed it for the "K" Hornet I was able to compare side by side with a DM80,
    I kept the DM, smaller, lighter & slightly quieter.


    Ditto, i have DM80s on all my rifles now.

  12. #12
    Join Date
    Oct 2006
    Location
    bude cornwall
    Posts
    448
    I have an evolution on my Anschutz .30-06 very happy with it.
    .22 rapid mk1 profile mtc mamba 3x12-44 sbc
    .20 mfr simmons 1.5x5-20

  13. #13
    Join Date
    Apr 2006
    Location
    smallfield near gatwick
    Posts
    829
    I'm picking mine up today. For the hornet. I was advised it was THE mod to have for it!
    beretta dt10 ,kofs 20b, ESCORT 12g semi-CAMO, 1022 ruger Volquartsen. Cz512 tactical Barton custom. 223 howa 1500 GRS stock

  14. #14
    Join Date
    Jan 2008
    Location
    Mold (Yr Wyddgrug) N.Wales
    Posts
    18,250

    Thumbs up

    I NOW have an Evo mod now for my 6.5 x 47. The build quality is second to none, its lightweight , and looks awesome as well. The rear bush was cut so well for my barrel it feels like such a bespoke piece of kit. As a predator user and very happy i have been with them to date i am not surprised that the new "girl" to the Wildcat stable is an amazing mod. I cant tell you how happy i am with it. Its nearly as good as the customer service. Alison at Wildcat is great to deal with and so knowledgable about their products. She kept me up to date with how long it would take to sort my mod with the little customer bits i wanted .....calling down to see them was a pleasure. I wish all people in the firearms trade could be this easy to deal with. All in all.... a very effective moderator, superb build quality.....and at under £200 and literally built to last i cant think of any negatives from the whole purchase experience. It goes without saying the sound reduction on report is very efficient equalling if not bettering mods costing far more.
    Rapid 7 / 10-22 ATN 2 Stiller Predator .204 Pulsar N970 Tikka T3 semi custom ATN MARS thermal.204 Tikka T3 Semi.223 Wylde IOR Operator Lawton 6mmBR Kahles Gen 3 - Stiller 6.5 x 47 Bushnell BDX - Winchester Red Performance SX3 12g

  15. #15
    Join Date
    Apr 2007
    Location
    Huddersfield West Yorkshire
    Posts
    139
    Not a very scientific review I'm afraid, but I've just purchased a T3 lite in .308 with a Wildcat Evo. First impressions were that it is no louder on a 308 than my .243 with it's original A Tec over barrel. The sound is possibly sharper, but it certainly isn't as noisy as I expected. Oh, and they look absolutely stunning. Very pleased.
    If you ain't living on the edge, you're taking up too much room.....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •