Results 1 to 8 of 8

Thread: Reloading .204

  1. #1
    Join Date
    May 2015
    Location
    Conwy
    Posts
    673

    Reloading .204

    I am slowly building up my reloading kit for my .204.
    Does anyone on here reload for the .204?
    I have load data from the previous owner of the rifle but unsure on the primers that were used and make of bullet. So there not really going to be the same. So it could be a case of starting from scratch.
    The manual is on its way so looking forward to a good read.

  2. #2
    Join Date
    Mar 2005
    Location
    Birmingham
    Posts
    974
    here just a few places...but please read the manual when you get it as it will help

    sierra


    nosler

    hodgdons

    I recently loaded some 204 rounds for a good friend of mine. We used 27.5gn of h4895, cci primers and I think they where hornady brass. This round is a compressed round doing about 3850fps but it was devastatingly accurate at about 0.25moa

    Please remember we worked up to this and although it was great in his rifle (sako 85 with 20" barrel)I'm not sure how it will be in yours, I will add though there were no big signs of pressure but the primers were just starting to flatten out.
    Last edited by enigma; 01-09-2016 at 03:11 PM.
    Without curiosity, evolution would have been greatly flawed.....

  3. #3
    Join Date
    Jan 2012
    Location
    Leicester
    Posts
    1,325
    .204 ruger .com

  4. #4
    Join Date
    Jan 2010
    Location
    bradford
    Posts
    1,387
    As the chaps have said above I also came across this http://www.thestalkingdirectory.co.u...-204-load-data

  5. #5
    Join Date
    May 2015
    Location
    Conwy
    Posts
    673
    The load data I have on the target is
    28.5gr of 4895
    32gr v max
    2.250 col
    Again very accurate load.

  6. #6
    Join Date
    May 2015
    Location
    Conwy
    Posts
    673
    Thanks for the link. I actually read that earlier in the week.
    It's a great round. Loving it at the mo.

  7. #7
    Join Date
    Sep 2006
    Location
    Driffield, East Yorkshire
    Posts
    3,052
    Copied from my reloading spreadsheet, top ten, H335 isn't far behind. Groups are edge to edge in good conditions.

    Case Powder Charge Bullet Primer Length Group"
    Hornady BLC2 31 32g V max Rem 7.5 2.275 0.21
    Hornady BLC2 31 32g V max Rem 7.5 2.26 0.25
    Hornady H4198 23.8 32g V max Rem 7.5 2.275 0.4
    Hornady H4198 24.5 32g SBK Rem 7.5 2.26 0.45
    Hornady H4198 24 32g V max Rem 7.5 2.275 0.48
    Hornady H4198 24.5 32g SBK Rem 7.5 2.255 0.6
    Hornady H4198 24.6 32g V max Rem 7.5 2.275 0.61
    Hornady H4198 24.4 32g SBK Rem 7.5 2.28 0.68
    Hornady X-Ter 27.6 32g V max Fiocchi 2.285 0.69
    Hornady H4198 23.8 32g V max cci 2.275 0.69

  8. #8
    Join Date
    May 2015
    Location
    Conwy
    Posts
    673
    Thanks for sharing. Appreciated.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •