Maximum seating depth for hornady 53 g v-max 223
Hi Lads. (maximum bullet seating depth for Hornady 53g v-max in 223)
I have a powder weight that i'm happy with, so tried copying factory Sako 50g bullet seating depth, as its very accurate with these's (there seated very deep) when i tried this the Lee bullet seating die, depth adjustment bottomed out at maximum seating depth, this was just short of what the factory Sako's were and measured 2.200, in shooting them i was pleased and happy with the result's, however when i then tried to make some more, i was funding that some of the bullets were not being gripped enough by the neck and shoving back into the case, after mucking about with the collet neck sizer, which appeared to be work as it should ??? it seemed to me that the bullets were not being gripped because they were pushed too far into the neck possibly on to the tapered bit ???
Any help and advise please.
Dave (warbucks)
Theoben Rapid MK1 177
AA S410 22
Bushnall Scout Range Finder
Hawk 3 x 9 x 40 m.a.p scopes
Deben mini pro lamping system