1924 BSA 'L' underlever spring question.

[HOMER]

Jim Maccari used (maybe still does) a Square section jobby of similar dimensions, think it was the "Merlin" ?. Jims springs are 1st rate as I'm sure you may be aware worth a try.
HTH

H

It's about 7yrs+ since I last bought from Jim but used to get regular deliveries no problem. I dont believe there is a UK importer/distributor currently, seems little need when his kit is available direct.

HTH

[Geoff555]

Hello Jon, No problem 15.19mm surface rusty and black with carbon!!
Cheers.
Geoff.

[Shed tuner]

Hello Jon, No problem 15.19mm surface rusty and black with carbon!!
Cheers.
Geoff.

Thanks..

wow - @ 4.5mm bore that's massively oversize... small swept volume, SCR must be around 150:1 . With anything other than leather, it would be unshootable...

I'd go for 3mm bore

[Geoff555]

Hello Jon, thank you, repairing the stock at the moment, dents, split etc. have sleeves 2.5mm to 4mm. plenty to try.
Cheers.
Geoff.

[Geoff555]

Hello Jon, thank you, repairing the stock at the moment, dents, split etc. have sleeves 2.5mm to 4mm. plenty to try.
Cheers.
Geoff.