Results 1 to 5 of 5

Thread: BSA ultamax

  1. #1
    Join Date
    May 2007
    Location
    farnborough hants
    Posts
    35

    BSA ultamax

    Hi, bought a second hand Ultramax after hearing many good reviews on hear about them. Rifle was great at first but now seems hard to cycle the bolt and have found many tiny flecks of what looks like chrome all around the action. Any ideas?

  2. #2
    Join Date
    Sep 2012
    Location
    Buckley, Flintshire.
    Posts
    1,075
    Some Ultra's have a reputation for doing exactly what you've described...the plating peeling off the pellet probe. My Ultra is about three years old now and (luckily) has not been affected. I believe the answer is to replace the bolt.
    HuMa regulated S200 .22...
    Artemis PP800 .177...
    Weihrauch HW45 .177

  3. #3
    Join Date
    Sep 2016
    Location
    camberley
    Posts
    12
    what you think are flecks of chrome are flecks of lead,it's not unknown for pellets to fall backwards out of the magazine into the action.i'll wager that's whats happened to yours.

  4. #4
    Join Date
    May 2007
    Location
    farnborough hants
    Posts
    35
    This almost looks like glitter and the bolt is hard to push forward when cycling another pellet into the breech. The rifle although second hand has not had a tin of pellets through it yet!

  5. #5
    Join Date
    Sep 2016
    Location
    camberley
    Posts
    12
    try single loading it without the magazine to see if it is still hard to close the bolt

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •