Nearly there.

[Blacknsilver]

I have been steadily buying bits of reloading gear ready for the .204.
I have a Lee Press on route along with a powder measurer.
I have a FL sizer die the de primer and neck sizer die along with the seater.
Bought a de burring tool and pocket primer cleaner.
Lee re loading manual
Rubs hand primer
Calibers
Ultra sonic cleaner.
50 cases of .204 that I bought ready prepared.
70 fired cases from my own rifle
And 30 un fired home loads.
Funnel and some lube also on route.
I have the load data of the loads I have.
I am still learning the best way to start.
So what would be my best route?

I'm unsure how many times the cases have been used.
Do I FL re size them all and start a fresh?
Buy new cases?

I haven't bought scales yet. Any recommendations?
Do I buy a case trimmer?
Sometimes you can read to much and end up with conflicting opinions.

I have a 21in barrel and looking to follow suit in the H4895 powder. V Max 32g
Unsure on which primers to use.
I hope to be ready to start loading at the Christmas holiday.
Any advice or help would be good.
Cheers