I picked up an lp400 yesterday and coming from a Steyr I could not put up with the grip issue on the lp400.

It's a very slight movement but also very annoying.

I made 2 rubber washers, one which was cut perfectly to the size of the hole on the grip with the centre cut out exactly the size of the bolt. Just like a normal washer.

The second washer was cut out exactly the size of the hole in the grip, but the centre hole was made smaller and scewed directly onto the bolt.

In this way the second washer sits inside the first washer. The grip is lovely now, 100% no movement

I put a pictue of the second washer here so you can see what i mean hopefully. http://s1295.photobucket.com/user/l4...tml?sort=3&o=0

I was looking for some polymer to make the washers, but all I could find was an old tennis grip enlarger that was already cut off an old raquet.

The rubber is 1mm thick and had already been preshrunk with a hairdryer, it is quite strong rubber. similar to this one https://www.racquetdepot.co.uk/tenni...FQrhGwodeDUI-Q

Hope this helps someone

Andy