daisy 200
I purchased a boxed Daisy 200 last year as a non functioning item. Looked like it's never been fired. After lots of internet trawling I came to the conclusion that they are pretty much unrepairable. But then I found a strip/repair vid on YouTube. The claim on the box of 'no seals or o rings' is not true. I replaced a very small o ring on the piercer as it screws into the body, and replaced the lifter rack spring with a stronger one. There is no co2 capsule to peircer seal on these guns but just simply put a small length of ptfe tape over the head of the capsule before putting the capsule in the gun. Mine now holds gas for a couple of days no problem. Alternatively the peircer can be replaced with one from the 1200. Available from JG Airguns in the State's. The gun now shoots quite well and can fire the 5 shot mag as quick as you can pull the trigger. The rebuild vid on youtube was done by Mr RuneRubble,? the guy who does all the airgun reviews on his balcony in Norway/Finland. John.
Last edited by Joncaddy; 30-11-2016 at 07:49 PM.
Theoben Fenman, Theoben Scirroco 2000, BSA Cadet Major, Webley Premier MK2, ASI Sniper!