Results 1 to 15 of 33

Thread: Today's Load Testing - Vhit 135

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Nov 2010
    Location
    Lancaster
    Posts
    2,248

    Today's Load Testing - Vhit 135

    Tested a few loads today using Vhit 135. Haven't used it before. Here are the results.



    Not majorly impressed and clearly more work to be done. I'm scratching my head a bit with what to do next. 25.4 seems the most stable so perhaps I need to tweak seating depth and see if that makes much difference.

    Then again, perhaps I need to test 25.2 and 25.3. All groups were four shots. 25.1 looks interesting, but perhaps not stable? There's two separate groups, one through the same hole and a figure of eight to the right.

    .22LR CZ452; .22 Hornet CZ527
    Tikka T3 Varmint .223; .204 Ruger CZ527 Varmint;
    6.5 Creed Bergara B14 HMR

  2. #2
    Join Date
    Nov 2005
    Location
    Gone West Young Man
    Posts
    20,266
    Quote Originally Posted by Elliott View Post

    so perhaps I need to tweak seating depth and see if that makes much difference.
    Its all about the COL

  3. #3
    Join Date
    Jun 2005
    Location
    leeds, west yorkshire
    Posts
    12,946
    Quote Originally Posted by bullbarrel View Post
    Its all about the COL
    i switched powders to varget in both my 308 and .223 as its simpler keeping to one if feasible.
    i kept my col in both cals and did load testing at the range.....luckily only the point of aim was off and i got thumb hole groups again.
    varget is pricey but if the outcome justifies it so be it........will try it on the 8mm and 30-06 and see if that as the same outcome

  4. #4
    Join Date
    May 2015
    Location
    Conwy
    Posts
    673
    I'm going through the same. Reminds me of the days of pellet testing for the air rifles. Lol
    Although that was much cheaper and easier than tuning a centrefire round.

  5. #5
    Join Date
    Jan 2013
    Location
    Devizes
    Posts
    5,031
    Quote Originally Posted by bullbarrel View Post
    Its all about the COL
    Are you using the same length as your N133 load? If so that side of things should be sorted and you just need to find the best powder weight.

    I'd load up 5 rnds each of 25.1 to 25.7 at .1 gr increments.

    Do you use a rear bag out of interest?
    Last edited by 223AI; 01-01-2017 at 10:11 PM.
    Thanks for looking

  6. #6
    Join Date
    Nov 2010
    Location
    Lancaster
    Posts
    2,248
    Quote Originally Posted by Boydy47 View Post
    Are you using the same length as your N133 load? If so that side of things should be sorted and you just need to find the best powder weight.

    I'd load up 5 rnds each of 25.1 to 25.7 at .1 gr increments.

    Do you use a rear bag out of interest?
    Yeah, the same Coal and I did indeed use a small, makeshift rear bean bag. Funnily enough tonight I've done exactly what you suggested there and loaded 5 rounds each from 25.1 - 25.6 in 0.1gr increments

    By the way, your inbox is full

    .22LR CZ452; .22 Hornet CZ527
    Tikka T3 Varmint .223; .204 Ruger CZ527 Varmint;
    6.5 Creed Bergara B14 HMR

  7. #7
    Join Date
    Jan 2013
    Location
    Devizes
    Posts
    5,031
    Quote Originally Posted by Elliott View Post
    Yeah, the same Coal and I did indeed use a small, makeshift rear bean bag. Funnily enough tonight I've done exactly what you suggested there and loaded 5 rounds each from 25.1 - 25.6 in 0.1gr increments

    By the way, your inbox is full
    Space cleared buddy
    Thanks for looking

  8. #8
    Join Date
    Feb 2013
    Location
    Llanybydder
    Posts
    484
    What bullets are you using?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •