Results 1 to 6 of 6

Thread: FAS 6004 sights.

  1. #1
    Join Date
    Jul 2007
    Location
    Matlock,derbyshire.
    Posts
    1,442

    FAS 6004 sights.

    https://www.flickr.com/photos/133234.../shares/RJ45oH
    I've got these left over after fitting a rail to mine as my eyes aren't up to using the open sights.There's a new front sight,a filed down pointed front sight,2 shortened springs to allow the rear sight to go low for short range plus the other bits including the front sight grub screw which I forgot to put in the picture.The rear sight aperture has been filed slightly round.
    Are these actually worth anything to anyone?
    SOLD.
    Last edited by brucieboy; 07-01-2017 at 05:29 PM.

  2. #2
    Join Date
    Jun 2010
    Location
    Wigan
    Posts
    934
    I'd like them to replace my worn ones depending on cost.

  3. #3
    Join Date
    May 2008
    Location
    Oxford
    Posts
    217
    I have a question on this very subject you may be able to help me with.

    I remember when the 6004 came out, it got some negative feedback regarding the rear sight not going down enough to shoot at ten metres.....wondered if this was sorted out?

    Many thanks

    Clive
    "This doll is extremely dangerous, it has voodoo qualities"

  4. #4
    Join Date
    Jul 2007
    Location
    Matlock,derbyshire.
    Posts
    1,442
    Mine was the same.You need a couple of coils cutting off,shorter springs or the same length but wider spaced coils as the originals get coil-bound and won't allow the sight to go low enough.

  5. #5
    Join Date
    May 2008
    Location
    Oxford
    Posts
    217
    That seems a bit pants seeing as its primarily a 10m pistol? Wonder if they'll rectify it?

    Clive
    "This doll is extremely dangerous, it has voodoo qualities"

  6. #6
    Join Date
    Dec 2012
    Location
    Bromsgrove
    Posts
    870
    Quote Originally Posted by brucieboy View Post
    https://www.flickr.com/photos/133234.../shares/RJ45oH
    I've got these left over after fitting a rail to mine as my eyes aren't up to using the open sights.There's a new front sight,a filed down pointed front sight,2 shortened springs to allow the rear sight to go low for short range plus the other bits including the front sight grub screw which I forgot to put in the picture.The rear sight aperture has been filed slightly round.
    Are these actually worth anything to anyone?
    SOLD.
    any chance of seeing your railed 2004....thanks buddy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •