Results 1 to 15 of 21

Thread: FWB 300s and Diopter Sight questions

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Nov 2008
    Location
    Preston
    Posts
    3,191

    FWB 300s and Diopter Sight questions

    Hello, I have recently purchased a 300s off Poison Dwarf on here. I am very pleased with the gun but never having used one or a gun with diopter sights I have a few questions which I hope someone could answer for me

    First of all the gun, shoots ok I think, the action slides back upon firing but then seems to slide freely until it moves to the forward position where it seems to lock until fired again, is this normal? Velocity seems healthy with falcon accuracy plus running consistently @ 650fps.

    Now for the diopter sights, I was surprised that when I peep through the hole that I can see the whole of the foresight let alone the circle element it houses! Just had a plink in the garage where I aimed at marks putting them inside the for-sight circle which put the pellets where I wanted them, is the circle a usual type of element for target disciplines? If not what others are available? I would imagine that on a pukka 10 meter target, the circle would surround the whole of the black centre which would be ok so long as the pellets land in the middle!

    Ooh, one final thing, what is the diameter of the hole in a bell target, might make my self one to practice on.

    Thanks in advance, Max
    Plinkerer and Tinkerer

  2. #2
    Join Date
    Jun 2009
    Location
    Taunton
    Posts
    496
    Yes, a ring foresight is the norm for target shooting. You're allowed to use a post foresight, but very few shooters do.

    Yes the foresight ring will surround the whole target. It's recommended that the ring is quite a bit larger, large enough that the target doesn't touch the inside of the aperture as you aim; for NSRA targets that's around 4.0mm+.

    Focus on the foresight ring not the target; the foresight moves, the target does not. The target will appear a little blurred in the background, but this is OK.

  3. #3
    Join Date
    May 2016
    Location
    Glenrothes
    Posts
    1,352
    Contact RobinC on here and purchase a copy of his very fine book. It will pay dividends, even if you are just shooting against yourself.
    Bin the Falcons and try some RWS Meisterkugeln and R10s. And go from there. Enjoy yourself

  4. #4
    Join Date
    Nov 2012
    Location
    Norwich
    Posts
    1,049
    Yes, the action slides about upon firing, until it slides forward again and locks.

    Im using falcons in mine for 25 meter benchrest, seem pretty accurate, and a dome head helps outside, over 25m.

    Our bell target at the club for vintage bell target is 3/8 inch (shot at 6yds)


    Enjoy your FWB! I love mine.
    Thanks - Geoff.

  5. #5
    Join Date
    Nov 2008
    Location
    Preston
    Posts
    3,191
    Thanks very much for the replies chaps, I do like the FWB, I have a good few air rifles but this is the first Target one so all a bit new. I will look into getting some wad cutters, all I have in stock are hobbies but I watched an american chap with a patch on his eye on Youtube who was using his outdoors with the falcons and AA 7,9 grain pellets to good effect. It was a bit difficult to see my target in the garage due to the light but I made a one hole group about 1/2" diameter at approx 10 meters so I was happy enough with that. Is there anywhere I can down load a pukka target to print out? Thanks again, Max
    Plinkerer and Tinkerer

  6. #6
    Join Date
    Feb 2016
    Location
    Bradford
    Posts
    43
    Hi

    You could have a look here for printable target - but be warned if you get hooked you'll want a proper pellet trap and card targets!

    http://www.craftygeek.co.uk/2006/09/.../#.WIu0P7byhE4

    HTH

    Paul

  7. #7
    Join Date
    Sep 2010
    Location
    Birmingham
    Posts
    134
    You can download 6 yard and 10 metre targets from here:

    http://www.craftygeek.co.uk/2006/09/...rifle-targets/

    Although ok for practice, one thing you will find is that even wadcutter pellets will not cut a clean hole through photocopy paper. I've ended up buying NSRA targets as the holes are cleanly punched and you can use the excellent Targetscan phone app to score the cards and keep a record of progress (http://www.targetshootingapp.com/). Whilst they may seem expensive you can fire more shots per target as the holes are easy to distinguish unlike the home printed targets and you save on printer ink. Note that the NSRA Shop website only sells 3000 packs but you can phone up for smaller quantities. If you have a nearby club (which I'd recommend joining anyway) you should be able to buy smaller quantities off the club at a discount and also save postage costs.

    Hobby pellets are absolutely fine as are Gecos and there's no need to pay any more. Both are great value for money and unless you are a national standard shooter, as good as you need. The 300s will still shoot them practically through the same hole at 6 yards/10m.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •