Page 2 of 2 FirstFirst 12
Results 16 to 18 of 18

Thread: Skan Pro 1 Chronograph

  1. #16
    Join Date
    Jul 2000
    Location
    Tremar
    Posts
    14,239
    Don't forget, if you want to use the metric units you must have the chrono placed tight up against the muzzle.


    That is the only way to get the crown joules.



    Goodnight.
    www.shebbearshooters.co.uk. Ask for Rich and try the coffee

  2. #17
    Join Date
    Jun 2003
    Location
    blackwood gwent wales
    Posts
    2,368
    I have a pro 1 will try it out tomorrow like Phil said press red button it should read 333. Then you shoot and it gives direct readout in FPS

    I will try holding down the button longer to see if it accesses any different menus but I don't think so
    ISP Airstream mk3 March F 2.5/25mml. Sportsmatch GC2 mk3 leupold 20/50 Steyr 2014 hft March x 5/50 MTR3 ISP Airstream MK3 March x 8-80 silver, fx impact m3 element helix Ripley AR4 blue Burris 8/32 Steyr 2014 hot all .177

  3. #18
    Join Date
    Nov 2016
    Location
    Gateshead
    Posts
    404
    Just managed to try it out. Inside was really dirty so cleaned it out so the sensors could actually pick something up. Tried my SLR98 and the average reading was 0.530. Therefore I went 530 x 530 = 280900 x16 = 4494400 / 450240 = 9.98ftlbs

    Its a little low but I will leave it as is.

    My Sirocco 2000 averaged 11.14 with the same pellets

    My Original pistols came between 2.4 and 3.2 ft lbs, which I know is about right. So looks like it works just fine. Got a few more to check now.

    Cheers.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •