Piston sleeve for a Gamo CF-16

[T 20]

Hi Richard, and welcome to the BBS.

I recently fitted a full sleeve into a Gamo piston, the little leg on the sear shown didn't touch the sleeve so a full sleeve was fitted.

With the design of the Gamo trigger if the leg was held out by the sleeve the trigger wouldn't latch, so giving you an indication that the sleeve needs relieving in the back hole.



All the best Mick

[rmwesley]

Many thanks for the welcome & the advice, really appreciate it

I'll see if I can track down a steel beer can or pick up something suitable from .

Once it is all back together I'll try and post up some pics of the before and after.

Thanks again!!!

[tinbum]

Use less grease or steel for a sleeve. Shiny though innit?!

[rmwesley]

Cheers Nick

So shiny you may not even remember it from when it was in your hands last week...