Hw110

[Wilderbeest]

The magazines seem to be going in and out , with much greater ease , the more I use them .
I drilled the stock and fitted sling studs, as the 'stock fixing socket cap' which can be replaced by a stud, definitely does not have enough
thread in the receiving, section , to support the use of a sling. (In my opinion, as a mechanical engineer).
There is a section of the stock 25mm (1 inch) 'towards the barrel' end , which is certainly thick enough to drill and insert
sling mounts.

The rifle continues to impress.

[oldskoolzzz]

The magazines seem to be going in and out , with much greater ease , the more I use them .
I drilled the stock and fitted sling studs, as the 'stock fixing socket cap' which can be replaced by a stud, definitely does not have enough
thread in the receiving, section , to support the use of a sling. (In my opinion, as a mechanical engineer).
There is a section of the stock 25mm (1 inch) 'towards the barrel' end , which is certainly thick enough to drill and insert
sling mounts.

The rifle continues to impress.

Must admit I'm used to the magazine system now and don't give it a second thought.

At first I found it a little awkward but it soon becomes second nature and as you mention they seem to slot in and out easier after use.

Mine already had some nice silver studs fitted front and rear by the previous owner.

Look pretty good contrasted with the black tactical stock etc I only really use the front stud for a bipod as I have no real need for a sling.

The front stud is a replacement for the original fixing not sure who makes it and I've not taken it out to check its length etc but it seems plenty secure to me especialy for bipod use.

I've never noticed it altering the POI either with or without the bipod on as there are rumours that replacement bolts with the QD stud on the HW100 & HW110 using a bipod can put strange pressures on the barrel clamp assembly which in turn could potentially alter POI.

I've also found that Acupell FT pellets are really good through it and so far are my tightest groups.

[Wilderbeest]

I have put a stud in the front bolt location , for bi-pod use only .

I bought a UTG Bugbuster scope, which comes with QD Mounts , and bought some QD mounts for the Photon XT
so now i can change from day scope to night scope in seconds , with very little or no change in zero, once initially
set up. The picattiny rail , is extremely handy.

I have a BSA r10 SE .22 FAC locked up in the gun cabinet almost redundant!

[TheMoose]

I had a play with one of these and a Hatsan Gladius last night. Talk about chalk and cheese! I'm leaning towards to HW110 because it impressed me greatly. I think I'd have a new stock made for it though.

[villaman]

I had a play with one of these and a Hatsan Gladius last night. Talk about chalk and cheese! I'm leaning towards to HW110 because it impressed me greatly. I think I'd have a new stock made for it though.

I have one and my god its good , i also have two HW100k ,which i thought would take some beating !!

[rapidresponse1]

been thinking of getting one of these,after reading the reviews my minds made up I'm going for one

[stubbs4612]

I have put a stud in the front bolt location , for bi-pod use only .

I bought a UTG Bugbuster scope, which comes with QD Mounts , and bought some QD mounts for the Photon XT
so now i can change from day scope to night scope in seconds , with very little or no change in zero, once initially
set up. The picattiny rail , is extremely handy.

I have a BSA r10 SE .22 FAC locked up in the gun cabinet almost redundant!

Hi wilderbeest,I have a hw110 comeing so i want to get mounts sorted before it comes!!,i too have a photon XT,can i ask which QD mounts do i need the useual ones or the reach forward/back mounts for correct eye releive,Thank you.
rgds stubbs4612

[bandit2329]

Hi not sure if of interest but the front sling stud which replaces the front stock one for the HW 110 is available on fleabay.

[Wilderbeest]

Sorry i know its way to late, sorry . UTG Quick detach mounts , are very reasonable priced for the quality.

The 110 has now had 10 tins through it , it has been very successful in the field on Squirrels and Rabbits.

I have read of one case where a 110 was being sold because of diminishing power output,????
Well , I chrono'd mine when new , and again today below are the facts and figures.
Both streams used the same chrono , and were shot in the same conditions,;
AA Diablo 8.4 grain .

11/04/2017;New . 781.8 /794.9/794.6/778.0/774.6/768.0/782.2/777.0/781.4/787.6.

10/10/2017; 798.6/796.6/787.0/787.3/790.5/781.9/784.4/790.1/787.4/790.7.

I dont think that's too bad is it?

[bandit2329]

Hi parts are on fleabay for110 replacement front stud also a rear adapter plate with stud fitted fit's between the butt pad and rifle stock no drilling needed longer screw required link to stud http://www./itm/WEIHRAUCH-HW110-HW99...wAAOSwwpdW3XUX link to butt plate http://www./itm/BLACK-RIFLE-SLING-PL...sAAOSwo4pYgc7Q

[bandit2329]

i also have one of these excellent rifles bought new after shooting friends it's spot on. Parts are on fleabay for110 replacement front stud also a rear adapter plate with stud fitted fit's between the butt pad and rifle stock no drilling needed longer screw required link to stud http://www./itm/WEIHRAUCH-HW110-HW99...wAAOSwwpdW3XUX link to butt plate http://www./itm/BLACK-RIFLE-SLING-PL...sAAOSwo4pYgc7Q