Hw110

[stubbs4612]

I have put a stud in the front bolt location , for bi-pod use only .

I bought a UTG Bugbuster scope, which comes with QD Mounts , and bought some QD mounts for the Photon XT
so now i can change from day scope to night scope in seconds , with very little or no change in zero, once initially
set up. The picattiny rail , is extremely handy.

I have a BSA r10 SE .22 FAC locked up in the gun cabinet almost redundant!

Hi wilderbeest,I have a hw110 comeing so i want to get mounts sorted before it comes!!,i too have a photon XT,can i ask which QD mounts do i need the useual ones or the reach forward/back mounts for correct eye releive,Thank you.
rgds stubbs4612

[bandit2329]

Hi not sure if of interest but the front sling stud which replaces the front stock one for the HW 110 is available on fleabay.

[Wilderbeest]

Sorry i know its way to late, sorry . UTG Quick detach mounts , are very reasonable priced for the quality.

The 110 has now had 10 tins through it , it has been very successful in the field on Squirrels and Rabbits.

I have read of one case where a 110 was being sold because of diminishing power output,????
Well , I chrono'd mine when new , and again today below are the facts and figures.
Both streams used the same chrono , and were shot in the same conditions,;
AA Diablo 8.4 grain .

11/04/2017;New . 781.8 /794.9/794.6/778.0/774.6/768.0/782.2/777.0/781.4/787.6.

10/10/2017; 798.6/796.6/787.0/787.3/790.5/781.9/784.4/790.1/787.4/790.7.

I dont think that's too bad is it?

[bandit2329]

Hi parts are on fleabay for110 replacement front stud also a rear adapter plate with stud fitted fit's between the butt pad and rifle stock no drilling needed longer screw required link to stud http://www./itm/WEIHRAUCH-HW110-HW99...wAAOSwwpdW3XUX link to butt plate http://www./itm/BLACK-RIFLE-SLING-PL...sAAOSwo4pYgc7Q

[bandit2329]

i also have one of these excellent rifles bought new after shooting friends it's spot on. Parts are on fleabay for110 replacement front stud also a rear adapter plate with stud fitted fit's between the butt pad and rifle stock no drilling needed longer screw required link to stud http://www./itm/WEIHRAUCH-HW110-HW99...wAAOSwwpdW3XUX link to butt plate http://www./itm/BLACK-RIFLE-SLING-PL...sAAOSwo4pYgc7Q

[jdk1]

I have got a 3d printed 12 shot .177 magazine coming from the bay at a very good price , item number 142533163698

https://www.youtube.com/watch?v=JT9Dof1YAZA