As long as you make sure the main body is flush to the top of the rail surface as you tighten it, this works well: http://www.airgunbuyer.com/makeBig.asp?ID=1320&pic=0
Cheap as well
Hello
Can anyone reccomend a decent rail spirit level to fit an LG100?
Dan
As long as you make sure the main body is flush to the top of the rail surface as you tighten it, this works well: http://www.airgunbuyer.com/makeBig.asp?ID=1320&pic=0
Cheap as well
Never go off half cocked....
All lies matter
You would probably be better with one to fit on the scope Dan so that you can set it true to action. Most of the dovetail ones are not that accurate.
BASC
Dean you are probably right but it's a royal pain in the .......
mine is a betts. its magnetic. suppose thats useless on an alloy sight? but betts do some loverly levels.
the only thing i can find wrong is the nut on the steering wheel.
I have not found a level yet that when it tightens down goes out of level, the only one I have that works screws through the rail its the only one that works for me.