A challenging question

[archie]

I have one of the old Lee presses for loading Brocock Tacs and it seems that the large brass valve which screws into the top of the press is blown. I can see no way to take it apart so looks like I shall have to find a new one. My question is where and if. I have just rang Best Fittings and they had no idea what I was talking about.
So, anybody have any suggestions as I still like to play with my revolver from time to time.

[bighit]

I have one of the old Lee presses for loading Brocock Tacs and it seems that the large brass valve which screws into the top of the press is blown. I can see no way to take it apart so looks like I shall have to find a new one. My question is where and if. I have just rang Best Fittings and they had no idea what I was talking about.
So, anybody have any suggestions as I still like to play with my revolver from time to time.

could try here https://www.solware.co.uk/brocock-air-cartridge

or brocock

http://silco.co.uk/categories/BACS-A...6-Accessories/ hose and adaptor http://silco.co.uk/products/RAM-CHARGER-HOSE-SET.html


or here http://tawnadoairguns.com/air_cartridge.php

[angrybear]

As they are effectively prohibited in the UK you might have to buy overseas where the design is still legal.

[archie]

It`s still perfectly legal to own and buy the tacs without a FAC. Trouble is no one uses them anymore. It does look as though the hose and valve is available although at £30 from Silco.

[archie]

Valve ordered from Silco. Thanks for the help.

[bighit]

Valve ordered from Silco. Thanks for the help.

your welcome.

[tinbum]

That's good to know! I have an old, rusty and untested ram charger here that I want to get working at some point. Nice to know where I can get the spares