Sash clamp spring compressor

[vestlenning]

For those who haven't tried it, a sash cramp with some kind of "keep the rifle in place" arrangement is a great spring compressor. Here's mine:

http://barx.org/diverse/airgun_spring_compressor_03.jpg

http://barx.org/diverse/airgun_spring_compressor_04.jpg

[bighit]

I saw this one on youtube the other week

http://www.airgundepot.com/air-ventu...ompressor.html

it clamps onto the scope rail

http://www.pyramydair.com/blog/2017/...ressor-part-1/

[DJP]

For those who haven't tried it, a sash clamp with some kind of "keep the rifle in place" arrangement is a great spring compressor. Here's mine:

http://barx.org/diverse/airgun_spring_compressor_03.jpg

http://barx.org/diverse/airgun_spring_compressor_04.jpg

I like that - a very neat and minimal way to do it.

[pjinoz]

For those who haven't tried it, a sash clamp with some kind of "keep the rifle in place" arrangement is a great spring compressor. Here's mine:

http://barx.org/diverse/airgun_spring_compressor_03.jpg

http://barx.org/diverse/airgun_spring_compressor_04.jpg

Hi,
Your setup is somewhat along the lines of mine which I use for my Webley Patriot; however, I find that large nylon adjustable cable ties (7.6mm wide) enable you to tighten better than rope. When finished cut them and throw away.
Cheers

Peter

[12/200]

For those who haven't tried it, a sash clamp with some kind of "keep the rifle in place" arrangement is a great spring compressor. Here's mine:

http://barx.org/diverse/airgun_spring_compressor_03.jpg

http://barx.org/diverse/airgun_spring_compressor_04.jpg

Pendant mode
"Sashcramp"

[vestlenning]

Pendant mode
"Sashcramp"

You're right - sash cRamp it is!

[Carl2]

What size / range is this cramp?

[vestlenning]

What size / range is this cramp?

900 mm.

[madcarlos]

For those who haven't tried it, a sash cramp with some kind of "keep the rifle in place" arrangement is a great spring compressor. Here's mine:

http://barx.org/diverse/airgun_spring_compressor_03.jpg

http://barx.org/diverse/airgun_spring_compressor_04.jpg

Handy advice, Thanks for sharing.

[1shot1kill]

You're right - sash cRamp it is!

& its pedant btw if we're pedantic😉

[Artfull-Bodger]

I like that, it's KISS engineering, Keep It Simple Stupid!

[venoman]

I saw this one on youtube the other week

http://www.airgundepot.com/air-ventu...ompressor.html

it clamps onto the scope rail

http://www.pyramydair.com/blog/2017/...ressor-part-1/

I dont think i would trust that clamped on the scope rail.

[aria]

Re sash clamp, I use a T bar type which can lock into a Workmate or similar vice.

[StellaArtois Sr]

This is the one I got. Excellent for under £15 http://www.toolstation.com/shop/p63897?table=no
I made some blocks for either end of the rifle, I just need to do some side blocks now.

[RichardH]

I dont think i would trust that clamped on the scope rail.

Seconded that's a bad plan