Results 1 to 2 of 2

Thread: 2300T - Transfer port advice

  1. #1
    Join Date
    Nov 2015
    Location
    Mansfield
    Posts
    44

    2300T - Transfer port advice

    Hello everyone
    I'm building a 2300T target pistol (.177) from the "ground up" as they say
    1. Any advice on the diameter of the TP with the criteria being accuracy ?
    2. Does this pistol need a hammer spring adjuster ?
    Thanks

  2. #2
    Join Date
    Apr 2008
    Location
    chesterfield
    Posts
    765
    Why bother?It will outshoot the shooter in standard trim anyway.Power adjusters are a waste of time in my opinion,far better to have a few different hammer springs to experiment with,the adjuster just seems to deform the spring in use.I can't fault mine.All I've done is clean up the trigger sear a little and drilled out the back plug to insert a decent spring guide.They will one hole all day in the right hands and are very consistent and frugal with the Co2.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •