Results 1 to 15 of 34

Thread: le page

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Feb 2008
    Location
    Huntingdon
    Posts
    9,253
    Quote Originally Posted by Frag Muppet View Post
    Disaster at the range today.
    Fired one shot & the nipple broke in two leaving half still in the barrel.
    Staff at the gun shop at the range tried to extract the other half of the broken nipple in there workshop,managed to unscrew it a bit but its still in there.
    Didn't want to try & force it out myself so dropped it off at Norman Clark's Gun Smiths in Rugby.
    Had to leave it with them as they were busy. Said it might be a five minute job or take an hour to sort, and that they would fit it in with there other jobs in the next week or two.
    I am hoping they take pity on me & sort it in a few days.
    I own several black powder firearms, taken the nipples off hundreds of times, never had anything like this before. Think it must have been a faulty nipple to break like that.
    The Gun Smith said he has seen it before & says its caused by people dry firing the gun in the shop?
    Spoken to Kranks they are sending me a couple of replacement nipples & I am waiting to hear back from the Manager.

    Very frustrated shooter!!!!
    Now you'll keep a broken screw/bolt remover in your possibles bag, right?

    It usually takes less time to remove a broken nipple than it does to read what I've just written.

    tac
    Last edited by tacfoley; 15-07-2017 at 10:35 AM.

  2. #2
    Join Date
    Sep 2011
    Location
    nr burnley ,lancashire
    Posts
    1,643
    Now you'll keep a broken tap remover in your possibles bag, right?

    It usually takes less time to remove a broken nipple than it does to read what I've just written.

    tac
    could you do a youtube video on that tac ?
    ballkeeper

  3. #3
    Join Date
    Feb 2008
    Location
    Huntingdon
    Posts
    9,253
    Quote Originally Posted by gtpkeeper View Post
    could you do a youtube video on that tac ?
    I will next time I get a broken nipple on my one and only BP revolver. I have to admit that I've never seen a broken one yet, but there's time, I 'spose.

    I amended my initial post for content. With a broken stud/bolt/screw you drill a suitable-sized hole in it [remember that a nipple already has one] insert the appropriate-sized stud remover - a left-handed thread item - and simply unscrew in the usual way. Harbor Freight sells a set of useful sizes for less than ten $$$.

    tac

    PS - the guy looking over my shoulder says B&Q do 'em, just like anywhere else. Halfords? Got no pound sign on my PC, hence use of $$$.
    Last edited by tacfoley; 15-07-2017 at 10:40 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •