Kral Demon.

[neil9629]

I have had the above gun for a while at the back of the cabinet.
Dragged it out yesterday for a bit of degrease and polish.

Welsh willy kit fitted - good news.
4 penny pieces as washers in the piston - not good news.

Stripped, cleaned, polished and lubed and I can only coax 5.8 ft.lbs out of it.

Any advice welcome, also can anybody tell me the o ring size in the breach seal set?

Cheers chaps.

[bighit]

I have had the above gun for a while at the back of the cabinet.
Dragged it out yesterday for a bit of degrease and polish.

Welsh willy kit fitted - good news.
4 penny pieces as washers in the piston - not good news.

Stripped, cleaned, polished and lubed and I can only coax 5.8 ft.lbs out of it.

Any advice welcome, also can anybody tell me the o ring size in the breach seal set?

Cheers chaps.

hi Neil. have you tried it with the old spring and the rest of the kit? is the new spring vastly different to the old one?

you could try the toilet paper trick on the breech trick to see if its a problem with the breech seals.

paul

[neil9629]

Evening Paul,

Sorry, I haven't explained myself properly.

I bought the gun and basically forgot about it, when I stripped it, I was surprised to find the previous owner had fitted a willy drop in.

Looking at the preloaded, I can only assume it has the wrong spring fitted.

I'll do a little research tomorrow and try and find out the spring dimensions.

Cheers
Neil

[bighit]

Evening Paul,

Sorry, I haven't explained myself properly.

I bought the gun and basically forgot about it, when I stripped it, I was surprised to find the previous owner had fitted a willy drop in.

Looking at the preloaded, I can only assume it has the wrong spring fitted.

I'll do a little research tomorrow and Tey and find out the spring dimensions.

Cheers
Neil

I see Neil. they share the same workings as other rifles . so finding out what spring was originally was in it may help.

some say its a rebadged gamo cfx. so might need to start looking there
https://www.customairseals.com/produ...y-breech-seal/ breech seal kit

or o-ring sizes here http://www.network54.com/Forum/47903...t+it%27s+worth

and the spring is a titan no.13 as seen here http://www.airgunbbs.com/showthread....46#post7259846


Paul

p.s .not yet checked that bush on the car I spoke to you about as the wifes not not been well enough to drive. my mate is a mechanic and he will check it for me . thanks for the advice .its appreciated.

[neil9629]

I see Neil. they share the same workings as other rifles . so finding out what spring was originally was in it may help.

some say its a rebadged gamo cfx. so might need to start looking there
https://www.customairseals.com/produ...y-breech-seal/ breech seal kit

or o-ring sizes here http://www.network54.com/Forum/47903...t+it%27s+worth
paul

Grand stuff, I'll look into replacing the seals before anything else.

[bighit]

Grand stuff, I'll look into replacing the seals before anything else.

I added more in that post lol

hope you get it sorted
paul