Airtech regged regal - my experience and not impressed at all

[Rabid]

Ha, your not on your own, I gave him a hw100 to service and rebuild as it had a leak, came back still leaking, I was told, oh I don't do the cylinder as they can be notoriously difficult, and I couldn't test it as you didn't include a filler probe with the gun, but happy to send you the seals if you want to have a go yourself, still waiting for the silencer that never came back with it.

Carl, we have spoken about this several times before, still nothing, your not a man of your word.

[Lucky Luciano]

Yes it is Carl Garbett- i can post all the emails and texts that we have exchanged if you want plus pictures of your posting (that you kindly sent me albeit days after you originally claimed the gun was posted) and the packaging it was returned in (sorry I must claim credit for that picture)!

Oh hang on let me think.... why don't I stage a picture of what was posted to you now and that should prove it, I must be a genius!.......the camera never lies! Are you in all seriousness saying that!!

Cost me £210 plus and I am going to stiff you for a a £53 magazine after paying that - seriously?, again shame if you do not know what is going on.

Then you say in the next breath that you have a .22 magazine in stock, well good for you but wtf am i going to do with that in a .177 gun?

[phil384]

Maybe everyone else is wrong and he's right???

[phil384]

.funny thing is I only found this thread because I searched for airtech. I wanted to know people's thoughts on the company. I was looking for a longer cylinder for my Ultra.

I think I'll take a rain check on that one!

[Lucky Luciano]

.funny thing is I only found this thread because I searched for airtech. I wanted to know people's thoughts on the company. I was looking for a longer cylinder for my Ultra.

I think I'll take a rain check on that one!

If you did please check to see if you get a .177 magazine or Rabid's silencer instead "oh yes I did post the cylinder you must be wrong"

[greenwayjames]

.funny thing is I only found this thread because I searched for airtech. I wanted to know people's thoughts on the company. I was looking for a longer cylinder for my Ultra.

I think I'll take a rain check on that one!

Surely as a RFD he is not allowed under the silly VCR act to send air reservoirs by post direct to customers. They must be sent RFD to RFD and collected after payng a handling fee. Other air tube suppliers obey the VCR act and quote it on their websites.

[greenwayjames]

Air Arms Field
SHOT 1 784=11.49
2 784=11.49
3 787=11.55
4 784=11.49
5 789=11.61
6 783=11.43
7 784=11.49
8 787=11.55
9 784=11.49
10 789=11.61

Check that out with JSB or Air Arms field Heavies and it will be over the 12 ft/lbs limit

[Lucky Luciano]

Air Arms Field
SHOT 1 784=11.49
2 784=11.49
3 787=11.55
4 784=11.49
5 789=11.61
6 783=11.43
7 784=11.49
8 787=11.55
9 784=11.49
10 789=11.61

Check that out with JSB or Air Arms field Heavies and it will be over the 12 ft/lbs limit

My experience has just gone beyond bad

[Bladerunner too]

Air Arms Field
SHOT 1 784=11.49
2 784=11.49
3 787=11.55
4 784=11.49
5 789=11.61
6 783=11.43
7 784=11.49
8 787=11.55
9 784=11.49
10 789=11.61

Check that out with JSB or Air Arms field Heavies and it will be over the 12 ft/lbs limit

not necessarily,according to one of the airgun mags.

[Tatts84]

Air Arms Field
SHOT 1 784=11.49
2 784=11.49
3 787=11.55
4 784=11.49
5 789=11.61
6 783=11.43
7 784=11.49
8 787=11.55
9 784=11.49
10 789=11.61

Check that out with JSB or Air Arms field Heavies and it will be over the 12 ft/lbs limit

My regal is 0.6ft lb lower with heavies and bis mags. It's not always a case of heavier = higher ft lb

[Lucky Luciano]

What he told me when I posted was that as has an engineering firm he will say it was a hydraulic part or something if it went missing in the post, oh the irony missing in the post (maybe they have my mag hmmm..), not sure of the RFD bit but maybe he does the same with cylinders??????

[airtech]

.funny thing is I only found this thread because I searched for airtech. I wanted to know people's thoughts on the company. I was looking for a longer cylinder for my Ultra.

I think I'll take a rain check on that one!

your welcome to use who you want

[rhyslightnin]

Maybe everyone else is wrong and he's right???

🐑.......

[secretagentmole]

Yes it is Carl Garbett- i can post all the emails and texts that we have exchanged if you want plus pictures of your posting (that you kindly sent me albeit days after you originally claimed the gun was posted) and the packaging it was returned in (sorry I must claim credit for that picture)!

Oh hang on let me think.... why don't I stage a picture of what was posted to you now and that should prove it, I must be a genius!.......the camera never lies! Are you in all seriousness saying that!!

Cost me £210 plus and I am going to stiff you for a a £53 magazine after paying that - seriously?, again shame if you do not know what is going on.

Then you say in the next breath that you have a .22 magazine in stock, well good for you but wtf am i going to do with that in a .177 gun?

But what about the poor bar steward who has a .22 gun and a .177 magazine?

[Lucky Luciano]

But what about the poor bar steward who has a .22 gun and a .177 magazine?

Ha ha - don't suppose you have his contact details he might want to sell