Airtech regged regal - my experience and not impressed at all

[greenwayjames]

Air Arms Field
SHOT 1 784=11.49
2 784=11.49
3 787=11.55
4 784=11.49
5 789=11.61
6 783=11.43
7 784=11.49
8 787=11.55
9 784=11.49
10 789=11.61

Check that out with JSB or Air Arms field Heavies and it will be over the 12 ft/lbs limit

[Lucky Luciano]

What he told me when I posted was that as has an engineering firm he will say it was a hydraulic part or something if it went missing in the post, oh the irony missing in the post (maybe they have my mag hmmm..), not sure of the RFD bit but maybe he does the same with cylinders??????

[Lucky Luciano]

Air Arms Field
SHOT 1 784=11.49
2 784=11.49
3 787=11.55
4 784=11.49
5 789=11.61
6 783=11.43
7 784=11.49
8 787=11.55
9 784=11.49
10 789=11.61

Check that out with JSB or Air Arms field Heavies and it will be over the 12 ft/lbs limit

My experience has just gone beyond bad

[Lucky Luciano]

I presume you are Charlie garner as I stated to you. when I worked on the rifle there was no mag in the wrapping. the rifle was sent back to you in the original box and wrapping. I'm not getting into a slagging match but if the mag was sent with the rifle it would have also been sent back with the rifle. but as I have said I personally did not see a mag. and as far as the rifle not shooting any better that's total rubbish the rifle was far easier to cock and this is the 10 shot chrono results with air arms diablo field. I think its just the fact your pissed off over loosing a mag. that I personally never seen. if I did it would have been sent back with the rifle.... these chono results look ok to me


SHOT 1 784=11.49
2 784=11.49
3 787=11.55
4 784=11.49
5 789=11.61
6 783=11.43
7 784=11.49
8 787=11.55
9 784=11.49
10 789=11.61

You may not have seen it but someone unpacked it and it was there with the other items all nicely wrapped up, as for pissed off for losing a magazine who wouldn't be.

It appears it maybe FAC now as well thanks for that

[greenwayjames]

You may not have seen it but someone unpacked it and it was there with the other items all nicely wrapped up, as for pissed off for losing a magazine who wouldn't be.

It appears it maybe FAC now as well thanks for that

It was a suggestion that you should check it out yourself with pellets that could give more energy. The JSB /Air Arms Heavy is just one. Dont panic - yet.

[Lucky Luciano]

It was a suggestion that you should check it out yourself with pellets that could give more energy. The JSB /Air Arms Heavy is just one. Dont panic - yet.

Just telling the wife to put away the smelling salts - phew

[Bladerunner too]

Air Arms Field
SHOT 1 784=11.49
2 784=11.49
3 787=11.55
4 784=11.49
5 789=11.61
6 783=11.43
7 784=11.49
8 787=11.55
9 784=11.49
10 789=11.61

Check that out with JSB or Air Arms field Heavies and it will be over the 12 ft/lbs limit

not necessarily,according to one of the airgun mags.

[greenwayjames]

not necessarily,according to one of the airgun mags.

Still a chance not worth risking for the sake of a quick check. Getting the Regal confiscated on top of everything else would take the biscuit

[rhyslightnin]

Maybe everyone else is wrong and he's right???

🐑.......

[ukace1958]

recently had my bsa ultra done at airtech , no problems , Carl talked me through what would be done, and all I can say on my experience was gun back within 2 weeks , and is amazing ,
so quiet and the bolt action is so smooth, shot count improved.
that's my 5 pence worth

[Lucky Luciano]

That's fair enough, shame everyone doesn't get that experience

[Baldie1]

Was he not on Judge Rinder for bad workmanship???

Dave

[lensman57]

not necessarily,according to one of the airgun mags.

If it a Daystate and it is shooting @ 11.6 with the 8.44s chances are that it may just go FAC with the Heavies. The Heavies add 0.4~0.7 ft.lbs to the 8.44 output depending on the gun, barrel length and Reg pressure.

A.G

[MartynB]

If it a Daystate and it is shooting @ 11.6 with the 8.44s chances are that it may just go FAC with the Heavies. The Heavies add 0.4~0.7 ft.lbs to the 8.44 output depending on the gun, barrel length and Reg pressure.

A.G

As A.G. said, if it was mine I'd check it to make sure

[piggy589]

Was he not on Judge Rinder for bad workmanship???

Dave

You're kidding,right? .