Results 1 to 3 of 3

Thread: HW95 block pins

  1. #1
    Join Date
    Nov 2012
    Location
    Norwich
    Posts
    1,049

    HW95 block pins

    I bought a HW95 about 6 months ago, stripped off the stock and .22 barrel, put the bits to one side.
    Got my new .25 barrel yesterday, went to put it all back together, and noticed I dont have 2 of the little square blocks with pins on, that hold the rear block in place. How important are all 4?
    There are 2 out of the 4 square pegs, 2 trigger pins, and a small turn lock of the main block.

    Will it be OK with only 2 out of 4 square pegs?


    Cheers!
    Thanks - Geoff.

  2. #2
    Join Date
    Jun 2011
    Location
    middlesbrough
    Posts
    8,809
    2 will be fine

  3. #3
    Join Date
    Jan 2007
    Location
    Newport, Gwent
    Posts
    950
    I cant see why they fit them some leave 2 out to make it easy to tap them out next time its stripped .
    .22 Venom Mach 1 (FAC) 6-25x56 Millett.
    .22 Venom Mach 2 Thumbhole 6.5-20x40 Leupold EFR.
    .22 Venom Mach 2 Sporter 4-12x40 Leupold.
    .177 Venom Vantage 4-16x50.
    .177 Venom Daystate 8-32x56 AGS.
    .22 Venom Datstate 4-16x56 AGS.
    .22 Webley Venom FX2000 6-18x40 Busnel Legend.
    .177 Titan MPT by Steve Pope 6-24x40 Tasco.
    .177 Pro-Sport 4-16x50.
    .22 Webley FX2000 3-9x33 Leupold EFR.
    .177 Logan Solo 4-16x50.
    .22 HW90 (spring powered) 4-16x50
    .22 Gamo Stutzen.
    .177 Walther lever action.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •