the HW80 k he did was left in the bare beech by me as I tried a stain and it looked horrible so I stripped it off. Mick then waxed it and did a few coats then sent it back.
the stock had a crack in the wrist area that I pinned with thin brazing rod that I roughed up on a bench grinder at work so the epoxy would key to it.
Mick filled the holes up ( not huge holes) too .you cold not spot them unless you really looked for then.
I have a pic of the stock some where . will try and find it.
https://www.dropbox.com/s/fqxq8d4wd1...21115.jpg?dl=0
That is just brown wax .that I think is briwax.
One pic found