Reply With QuoteIIRC they are threaded in. They used to be avalable seperately, so worth talking to Impact, or RAW, or whoever it is now. But it's just a button, so easy enough to make - just harden it a little afterwards.
Registered User
Theoben sirocco I have just acquired one in lovely custom laminated stock but it wont cock.
Took the action out of the stock and it looks as if someone has tried to cock it out of the stock thus pulling the piston cocking dog out of the slot.
Does anybody know if the dog is threaded into the linkage arm or a press fit.
Anyway I will be off to see my engineer to see if he can make me a couple
Last edited by 10/10; 29-05-2017 at 04:43 AM.
Registered User
IIRC they are threaded in. They used to be avalable seperately, so worth talking to Impact, or RAW, or whoever it is now. But it's just a button, so easy enough to make - just harden it a little afterwards.
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
Guest
Knibbs has them. http://www.airgunspares.com/store/pr...o%3A-TH101016/
Not sure if it's the same for the scirocco
Registered User
Thanks for the replies. All sorted it was a press fit 2 being made
Last edited by 10/10; 27-05-2017 at 03:25 PM.
Posting Permissions