2nd and 3rd September 2017 Boinger Bash And Fundraiser In Aid Of St Giles Hospice

[TonyL]

Be careful Bruv, she's after something

She can sod right off, Pauly! I'm far too knackered for that, be glad to get back to work for a rest!.......











Not!



Back to work tomorrow.....boo hoo!

[NewPaul]

Have you got that Man Cave/Wendy House sorted yet Tone

[DavyWavy]

Looking forward to trying it out on Sun 3rd!

[TonyL]

Have you got that Man Cave/Wendy House sorted yet Tone

Unfortunately not, Pauly.

Well, it's there. And there's the Workmate and a chair in there. But there's also all sorts of clutter in there that needs lobbing / re-homing. To be fair, once clear, it'll be fine as I'll keep the majority of tools and bits and bobs in the (more secure) garage.

[TonyL]

Looking forward to trying it out on Sun 3rd!

Good man, Davy.

Nothing wrong with getting a fair bit of lead down it to bed things in nicely beforehand.

Did you do anything else other than fit the kit?

It'd also be a good idea to run it over a chrono.

[TonyL]

Indeedy my fine boingering peeps, the Sleepometer today says, "29 to go".

BOING!


Could do with those numbers bumping up though, peeps.


BOING!!

[tinbum]

Never mind Quigley Hollow, I'm off to Soggy Bottom in a minute to check on the happy campers!

[TonyL]

So, how are things in Squidgy Bum?

BOING!!

[DavyWavy]

Good man, Davy.

Nothing wrong with getting a fair bit of lead down it to bed things in nicely beforehand.

Did you do anything else other than fit the kit?

It'd also be a good idea to run it over a chrono.

It shouldn't be any different as I have nit altered the spring size but yes I'd like to chrono it.

Is anyone likely to have one at the bash?

Also, what size thread is required for that silencer? Is it just a matter of drill and tap or do I need to remove anything first... oh, as as I often ask, how deep should I go?

Thanks,

David

[Mole trapper]

So, how are things in Squidgy Bum?

BOING!!

Well let's just say I've literally put the last three drunken bums to bed about ten minutes ago!
Paul and Chris took about ten minutes to find the gate to get into the field where their tents are, I could have shown them but it was too hilarious.

[TonyL]

Sounds great fun, Jamie.

But are you sure they were actually trying to get through the gate?

[TonyL]

When I stepped out of the door earlier with my Brem', there was a slight little chill on this fine, fair sunny morn and it kinda made me think how similar it may well be at Bash Time, and how it's now just four weeks' wait away.

Oh yes indeedy, peeps, we're now just 28 sleeps away; this thing's gonna be on us quicker than you know.

Can't bleddy wait for this and to see you nice folk again and welcome more newbies.


Get them fun tokens winging their boingering way to our Mick, peeps, thus booking your place at this awesome event and participating in the sure-to-be-fun charity shoot, too.


C'mon, we're counting on ya...




BOING!!

[TonyL]

WAHAY!

I see The Bongo Meister and 18Wheeler are on the list now!

Updated on the 2nd? I must have missed it.

As ever, it'll be fantastic to see you two lovely peeps again.


BOING!!

[TonyL]

It shouldn't be any different as I have nit altered the spring size but yes I'd like to chrono it.

Is anyone likely to have one at the bash?

Also, what size thread is required for that silencer? Is it just a matter of drill and tap or do I need to remove anything first... oh, as as I often ask, how deep should I go?

Thanks,

David

Hi Mr Wavy,

Sorry that I didn't get the chance to talk properly when you called in.

Definitely worth checking the power output. Although the spring is the same, the preload on the spring may have increased (subject to the heights of the shoulders on the top hat and guide compared to the height of the washer - spring bearing surface on the factory guide). Plus you wouldn't have checked the power prior to fitting the kit.

Yes, there's usually a chrono at The Bash, but it may be worth nipping into the shop where you bought it from and ask them to check.

Re screw cutting the barrel, it's not something I've done / had done. But it'll be 1/2" UN male you'll need, as it's a 1/2" UNF thread on the silencer. Dunno if you can buy a suitable adaptor as, again, it's not something that I've ever pursued.

Someone on here will know and be able to advise better.

[TonyL]

27 to go, peeps.


Tick tock, tick tock.......


How's tricks in Squirrely Behinds, boys?


BOING!!