Hi Jim, Thanks for that - but I had already set it up but run out of adjustment on wheel.
Hi Jim, Thanks for that - but I had already set it up but run out of adjustment on wheel.
"helplessly they stare at his tracks......."
Is the item you are putting the scale on level?
You Cannot Reason People Out of Something They Were Not Reasoned Into
"Politicians like to panic, they need activity. It is their substitute for achievement" Sir Humphry Appleby
I had this problem with my RCBS scales. Turned out I'd managed to bend the bit of copper that works with the magnetic damper slightly out of line, not much but enough. Also check that the wire that holds the pan is not out of shape, it doesn't take much.
Have you got the adjustable vernier poise set to zero? The brass adjuster usually has plenty of range unless you have the wrong pan or some such problem.
Hi, Thank you for your reply. Yes adjuster is at the maximum setting. I had started thinking about the pan too.
Cheers
"helplessly they stare at his tracks......."