Originally Posted by
micky2
A very nice job. l bet the hardest part was getting the pellet hole in the right place.
Micky you are so right, I was thinking that as I was making it. Had all kinds of ideas how to mark it. Eventually I used an allen key that fitted the .177 bore exactly and had a very small right angle section.I put it down the transporter slot and hooked it in the bore. Then I scribed a line on it level with the top of the rifle and took measurement. The position I drilled worked spot on, I checked it by firing wadcutters into a soft pack of material and examined the front of the pellet to see if they had any marks from hitting the edge of the barrel breach.
Baz
BE AN INDEPENDENT THINKER, DON'T FOLLOW THE CROWD