Page 1 of 2 12 LastLast
Results 1 to 15 of 39

Thread: Suggestions for "practical" Co2 pistol

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Jan 2018
    Location
    Wandsworth
    Posts
    12

    Question A little confused

    As you might guess from my post count, I'm new here - and trying to learn and understand what UK IPSC is all about. If I was to get involved with any form of sports shooting, the IPSC Pistol discipline would be the one I'd go for. However I've just downloaded a PDF of the UK IPSC 'Action Air' Handgun rules and I'm confused by rule 5.1.2 - 'Approved Action Air Handguns are those which fire projectiles of 6mm diameter' - which surely means airsoft pistols only?

    However from what I read above suggests that .177 BB/Pellet pistols are also accepted disciplines at certain clubs? I have an Umarex Colt CO2 1911 A1 .177 BB pistol and have the Webley 'Accu BB' lead/full copper jackets for it, and it would be great to have a go with this at an IPSC match, if allowed. Otherwise it's an airsoft 1911 variant that I'll be getting to use instead - which is ok I guess as they are very realistic gas blow-backs as well. But less accurate I thought for target shooting.
    "You make contact with your customer. Understand their needs. And then flog them something they could well do without.” - Arthur Daley

  2. #2
    eyebull's Avatar
    eyebull is offline Even a stopped clock is right twice a day
    Join Date
    Feb 2012
    Location
    Borehamwood
    Posts
    6,769
    When I did Practical Pistol, almost everyone - including me - used Tokyo Marui Hi Capa 5.1's in 6mm bb, using 'green' gas (actually we tended to use higher pressure 'black' gas), modified to one extent or another. A few people tried CO2 but generally it was expensive in caplets, a bit of a hassle, and most of the time ended up smashing the guns to bits. TM hi capas have a vast aftermarket spares industry and are easy to work on. Priority modification is a metal slide because the plastic one will crack if you are using black gas. I liked to keep mine fairly stock-looking (although I did short-stroke it), but some people spent....a LOT of money. A lot. TBH you don't have to, a lot of it is in the mind; Reliability is the most important thing.
    At one place I shot practical you could have used a pellet pistol, but if you had done so you would have been at a distinct advantage when it came to speed reloading and pace of fire. BB guns are plenty accurate at the range and for the size of targets you shoot in practical.

    For IPAS I used an Umarex S+W 586 - perfect if you have a slightly larger hand. Also a slight advantage in that it is 10-shot. Most other people used a mix of CP88s and 586s, with the odd Umarex 1911 thrown in. Again the Umarex pistols have been around for years so there are plenty of spares available.
    Only went to a couple of IPAS matches where BBs were allowed. If outside they suffered greatly in the wind and at longer targets, semi auto was not a massive advantage as far as I could see.

    Doing something like IPAS or practical sorts the men from the boys when it comes to pistols. You'll put a hell of a lot of shots through in one day or evening, equivalent to months of normal plinking duty. Anything with reliability issues quickly falls by the wayside. The above will work, a lot of guns won't.
    Good deals with these members

  3. #3
    Join Date
    Dec 2011
    Location
    blackburn
    Posts
    2,032
    At our club we do I.P.A.S
    We do not allow bb's of any sort due to ricochets .
    Whilst blowback pistols are great fun, we find that most people use the Smith and Wesson revolver, the Walther CP88 competition or the Colt 1911 .
    Most of all , enjoy it !

  4. #4
    eyebull's Avatar
    eyebull is offline Even a stopped clock is right twice a day
    Join Date
    Feb 2012
    Location
    Borehamwood
    Posts
    6,769
    Quote Originally Posted by Alakar View Post
    At our club we do I.P.A.S
    We do not allow bb's of any sort due to ricochets .
    We did find that with black gas/CO2 and plastic BB's, the BB's shattered on impact so ricochets were not an issue. It may depend on your plate set up though.


    Quote Originally Posted by Alakar View Post
    Most of all , enjoy it !
    Hear hear. IPAS and Practical is probably the most fun I've had airgunning. Unfortunately I have very little time to shoot these days and no longer have a vehicle.
    I really, really miss it
    Good deals with these members

  5. #5
    Join Date
    Jan 2018
    Location
    Wandsworth
    Posts
    12

    Cool

    Quote Originally Posted by eyebull View Post
    We did find that with black gas/CO2 and plastic BB's, the BB's shattered on impact so ricochets were not an issue. It may depend on your plate set up though.




    Hear hear. IPAS and Practical is probably the most fun I've had airgunning. Unfortunately I have very little time to shoot these days and no longer have a vehicle.
    I really, really miss it
    Yes I thought that there are ways to minimise/stop ricochets with BBs. I was curious about the Webley Copper BBs and how effective they are in this regard for 4.5mm, and if they are suitable at all for use in Umarex air pistols. Big shame that you are not as involved with IPAS as you'd like to be. Not having a car is a big barrier in this sport. I'm in London and probably quite fortunate as there seems to be quite a few clubs within easy travelling distance by public transport, however I'm struggling to find one that offers IPAS. The airsoft range in Camden is looking like my best bet at the moment.
    Last edited by Barison82; 28-01-2018 at 04:05 PM.
    "You make contact with your customer. Understand their needs. And then flog them something they could well do without.” - Arthur Daley

  6. #6
    Join Date
    Dec 2011
    Location
    blackburn
    Posts
    2,032
    Hi,
    I'm a bit far away from you I think .
    We are in Blackburn Lancashire.
    We had a fun shoot this morning and included I.P.A.S
    The quickest time was 3.13 seconds for 5 plates !

  7. #7
    Gareth W-B's Avatar
    Gareth W-B is offline Retired Mod & Airgun Anorak Extraordinaire
    Join Date
    Nov 2004
    Location
    Near(ish) Chelmsford
    Posts
    26,446
    .
    As someone who used to do Practical Mini Rifle with a banana mag fed Ruger 10/22 sat in a synthetic Heckler & Koch styled stock, imho, the best gun for Co2 Mini Gun would be the Umarex MPK-PDW or the Sig Sauser MCX / MPX.
    _______________________________________________

    Done my bit for the BBS: http://www.airgunbbs.com/showthread....-being-a-mod-… now I’m a game-keeper turned poacher.

  8. #8
    Join Date
    Jan 2018
    Location
    Wandsworth
    Posts
    12

    Thumbs up

    Quote Originally Posted by Alakar View Post
    Hi,
    I'm a bit far away from you I think .
    We are in Blackburn Lancashire.
    We had a fun shoot this morning and included I.P.A.S
    The quickest time was 3.13 seconds for 5 plates !
    Hi. Yes you are just a bit too far away - shame! That sounds like great fun. Can't wait to get involved. IPAS and IPSC is definitely the way to go. Blimey. 3.13 seconds for 5 plates is outstanding! A great score indeed.
    "You make contact with your customer. Understand their needs. And then flog them something they could well do without.” - Arthur Daley

  9. #9
    eyebull's Avatar
    eyebull is offline Even a stopped clock is right twice a day
    Join Date
    Feb 2012
    Location
    Borehamwood
    Posts
    6,769
    Quote Originally Posted by Barison82 View Post
    Yes I thought that there are ways to minimise/stop ricochets with BBs. I was curious about the Webley Copper BBs and how effective they are in this regard for 4.5mm, and if they are suitable at all for use in Umarex air pistols. Big shame that you are not as involved with IPAS as you'd like to be. Not having a car is a big barrier in this sport. I'm in London and probably quite fortunate as there seems to be quite a few clubs within easy travelling distance by public transport, however I'm struggling to find one that offers IPAS. The airsoft range in Camden is looking like my best bet at the moment.
    Out of curiosity what's the name of the Camden range?
    I did some IPAS at East Barnet Shooting Club, not sure if they still do it there though.
    Good deals with these members

  10. #10
    Join Date
    Jan 2018
    Location
    Wandsworth
    Posts
    12
    Quote Originally Posted by eyebull View Post
    Out of curiosity what's the name of the Camden range?
    I did some IPAS at East Barnet Shooting Club, not sure if they still do it there though.
    Hi eyebull - apologies for the very late reply, I've not been here for a while! The Camden range is called 'Alpha Guns London' and is on Camden High Street, located in a downstairs basement. I went in there to check it out, the venue is quite small, the shop sells two-tone airsoft guns and has an all-enclosed range. Their website is here: http://alphaguns.london/epages/5eaa6...ath=Categories although it doesn't show very much! Cheers
    "You make contact with your customer. Understand their needs. And then flog them something they could well do without.” - Arthur Daley

  11. #11
    Join Date
    Jan 2018
    Location
    Wandsworth
    Posts
    12

    Thumbs up Thanks for feedback

    Quote Originally Posted by Alakar View Post
    At our club we do I.P.A.S
    We do not allow bb's of any sort due to ricochets .
    Whilst blowback pistols are great fun, we find that most people use the Smith and Wesson revolver, the Walther CP88 competition or the Colt 1911 .
    Most of all , enjoy it !
    Hi Alakar, where is your club based? I know that the CP88 is excellent. However the 1911 is my favourite pistol design, the classic A1, Series 70 and MEU etc and I just love the way it looks, and I may well end up having to get the .177 Pellet version from Umarex, to give me more choice as to where I can shoot if I want to practice .177 targets. Full Copper Jacket lead BBs by Webley are supposedley low ricochet, but not low enough for 10m target evidently? I've found a dedicated indoor 6mm airsoft range near where I work so it looks like I'm heading in that direction to start off with. At least it's a start as I've got zero experience under my belt as I speak. At the very least, I can learn and practice safe gun handling disciplines and etiquette, and I really do want to practice this until it becomes second nature. My other half is Australian and we have family that we visit out there every year. IPSC with a 9mm (and .45 I think) pistol is still allowed out there as a discipline and there's a local gun shop which stocks 1911s. Handguns are Category H firearms in Oz and there are many hoops you have to go through to get one but at least it's something I could have a chance of doing in the future, if I end up living out there. So IPSC with airsoft might be the best form of practice in this regard. And yes - I do want to enjoy it, above all else, otherwise what's the point!
    Last edited by Barison82; 28-01-2018 at 05:06 PM.
    "You make contact with your customer. Understand their needs. And then flog them something they could well do without.” - Arthur Daley

  12. #12
    Join Date
    Aug 2013
    Location
    Manchester
    Posts
    2,060
    Looks like a decent S&W 586-6 in sales at the moment. These are very good, reliable and accurate....if you like revolvers.
    Treat Others As You Would Wish To Be Treated.

  13. #13
    eyebull's Avatar
    eyebull is offline Even a stopped clock is right twice a day
    Join Date
    Feb 2012
    Location
    Borehamwood
    Posts
    6,769
    Quote Originally Posted by Aimstraight View Post
    Looks like a decent S&W 586-6 in sales at the moment. These are very good, reliable and accurate....if you like revolvers.
    The best Umarex pellet replica IMO. They are all revolvers after all, but at least the S+W isn't trying to be something it isn't.
    Most accurate, best sights, best trigger, best build, most shots, and most reliable.
    Good deals with these members

  14. #14
    Join Date
    Aug 2013
    Location
    Manchester
    Posts
    2,060
    Quote Originally Posted by eyebull View Post
    The best Umarex pellet replica IMO. They are all revolvers after all, but at least the S+W isn't trying to be something it isn't.
    Most accurate, best sights, best trigger, best build, most shots, and most reliable.
    I agree, and the one for sale is the more desirable original gloss finish and from a long term bbs member (I have no connection with the sale).
    Treat Others As You Would Wish To Be Treated.

  15. #15
    Join Date
    Sep 2010
    Location
    Bruton
    Posts
    6,595
    Quote Originally Posted by eyebull View Post
    The best Umarex pellet replica IMO. They are all revolvers after all, but at least the S+W isn't trying to be something it isn't.
    Most accurate, best sights, best trigger, best build, most shots, and most reliable.
    I agree. But the trigger, on DA, is sometimes annoying.

    A real S&W, after the slack is taken up, gives a smooth pressure at a constant pull weight, this unlocks the cylinder, starts rotating it and lifting the hammer, keeps doing that, locks the cylinder, lifts the hammer a bit more, and then releases it, seamlessly. At constant pressure.

    The older real Colt DA, by contrast, is different. It "stacks" - gets slowly heavier (doing all that stuff above) and then releases the hammer to fire. With experience, one can pull through quickly to the end of the "stack" and then (fractions of a second later) allow the piece to settle on aim before adding a tiny bit of pressure to fire. But you can not use that technique as quickly and accurately as the S&W without that small pause.

    The real S&W is better for very fast DA work. The real Colt is inferior, but, with practice, a user can feel when it is about to fire, and pause there for a micro-second before pulling through to fire, with good results. At least on a range.

    The Umarex S&W trigger is smooth, raising the hammer while unlocking and rotating the cylinder, but near the end of the pull it often needs a slight additional pressure to finally rotate and lock the cylinder, which can disturb the aim, before immediately getting slightly lighter and releasing the hammer. This is impossible to manage with complete smoothness and therefore accuracy. Not all of them do this, or if they do, they do it to different degrees. But the inherent timing issues are palpable.

    But, for emphasis, the Umarex S&W remains the best of the Umarex pellet guns for accuracy, and for fast accuracy. It is closely run by the CP88 (and to some extent the 92) in both categories in DA, and by most Umarex pistols in slow-fire accuracy (though it still edges them, as a result of better sights, balance, etc - but don't discount a CP99 in single-action, despite its small size and poor sights). The Desert Eagle, with good trigger control by the user, beats it in the "high speed, moderate accuracy" stakes, as it can fire about 50% faster, but with lower ultimate accuracy and much more noise - and it is very gas inefficient.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •