more annoying is when you have a perfectly working cylinder, no leaks etc, they send it off to have its pillar valve serviced because it is a due or something, then It comes back leaking
you can try to ask them to leave it connected longer while you shop around, to top it off just before you leave.
they may not listen though
there are some quite good Chinese compressors out there for 2-300quid, and no more worries about the need of having periodic tests on cylinders etc.
Last edited by krisko; 19-07-2017 at 07:21 AM.
Getting your bottle filled while you wait is a bonus, if youlose a 20 bar set that off against the cost of a return visit.
If you leave your bottle and go back to collect then itshould be at 300 bar.
Don’t confuse luck with ability.
dive shops are a bad idea. they make you dive in water. then make you drink expensive beer. i suppose the gasses in the beer defeats the bends.
the only thing i can find wrong is the nut on the steering wheel.
HW77K .22, HW100KT .22, HW95K .22. AA TX200 MK3 .22. AA S410 MK3 .177. HW80 .25 HW30S .22. Pistols: Walther CP88 .177, Hatsan Mod25 Supercharger .22, HW45 Silver Star .177, Webley Alecto .177, SMK Victory CP2 .22
Before it closed..my local gunshop used to put the bottle into a bin full of water to keep it cool and also top up after waiting 15 minutes or so.
Chairman Emley Moor F.T.C. 2023 - Misfits champ, HFT extreme champ, NEFTA hunter champ, Midlands Hunter champ, UKAHFT champ.
https://sites.google.com/site/emleymoorftc/contact-us
[QUOTE=krisko;7302306
there are some quite good Chinese compressors out there for 2-300quid, and no more worries about the need of having periodic tests on cylinders etc.[/QUOTE]
Chinese Compressors and untested Cylinders, now that seems like a recipe for a long life
The one I use in Stockport does the whole job in about 5 minutes, . I have really only had one good fill from them in the last 18 months. The last one they did was abysmally short and after about 20 fills, 7 litre bottle and 150cc cylinders, I need to return the bottle. The only good point about them is their proximity so very little petrol money and time is invested getting to them. I know of people who have to travel over 40 miles to get to a fill station. I guess 280 bar in a 300 bar bottle is not bad going at all. With hindsight I should have bought a 12 litre bottle as it would have been more economical.
I waited while the bottle was filled, that was my mistake, as already said, wait for the bottle to cool then ask to check and top up.
A full bottle is necessary today with guns that require a fill of up to 230bar. That short fall of 20bar is quite a few fills on the smaller tubes of my BSA Goldstar and Scorpion.
Someone said house work wont kill you, but I say 'why take that chance'
www.airgunshooter.co.uk
I've found that Dive shops often give a better fill.
They seem to fill the bottle more slowly and often in a cold bath to help with the heat build up.
Their filter will be spot on too .
Its still a good idea to have your bottle regularly tested even if you own your own compressor.
Thats my experience to. Perhaps that is because lives depend on it not just a missing 10 shots.
I find if I leave it at my local specialist diving shop and pick it up the next day its full.
Founder & ex secretary of Rivington Riflemen.
www.rivington-riflemen.uk