Lube otherwise they can roll and twist when you slide the front and rear blocks into position.
Lube otherwise they can roll and twist when you slide the front and rear blocks into position.
I've regularly use silicone grease on the o rings for my wife's BSA ULTRA charging probe as it helps prevent air leaking during the charging process and it prevents the o rings perishing - so in short definitely use the silicone grease on o-rings if you want to preserve them/maintain it performance.
Weihrauch HW97 .177, Weihrauch HW80 .22, Weihrauch HW77 .22
Just a smear of SM 50 on the O rings. The exception for me is in the REG of my HW 100 where one O ring was advised to be left dry.
A.G
Dow Corning MS4. if you leave it long enough to settle you get oil and grease. i worked with it long enough.
the oil that floats to the top will waterproof the bluing better than any shop bought anti waterproof oil.
just a bit of info on molly. did you know the the roll up cabs on lorries use it.
the only thing i can find wrong is the nut on the steering wheel.
Lubrication with silicone grease/oil promotes even seating of the seal. Prevents the oring from bunching up on rotation.