Hello knowledgeable gang,
I will reseal my FN19 soon. Do I need to put a very small amount of silicone grease/oil on the new O-rings or do I leave them dry?
Cheers
Hello knowledgeable gang,
I will reseal my FN19 soon. Do I need to put a very small amount of silicone grease/oil on the new O-rings or do I leave them dry?
Cheers
WANTED: Next weeks winning lottery numbers :-)
I always use a smear of Molycote on O rings , It just makes it easier !
Cheers Crowbar
leave them dry.
I always use the lightest smear of vacuum grease that I can, that is rub a small amount between your fingers and then over the o-ring.
Definately lube them using a very small amount of silicone grease. If you don't, you risk cutting them during installation and also not seating correctly.
Happy Shooting!! Paul.
"We cannot solve our problems with the same thinking that we used when we created them" - Albert Einstein.
I use Abbey SM50 just the slightest smear
Cheers chaps.
WANTED: Next weeks winning lottery numbers :-)
Lube otherwise they can roll and twist when you slide the front and rear blocks into position.