HW100 middle sear

[lensman57]

Unfortunately for some reason the Serbian seller won't post to the UK.

Probably still pissed off with us over the Balkan war.

A.G

[fullbandit]

UPDATE
so ordered a sear from Fentons on Tuesday morning and it arrived Thursday lunch time. royal mail signed for delivery.

took me about 15- 20 minutes to fit today. the only problem i had was removing and refitting the pivot bush. it is a tight pressed fit in the original part but a minute with a chefs blow torch warming the sear up soon had it popping out with a gentle tap.

refitting the bush to the new sear shows a slight indifference in the tolerances as the bush is not a tight fit in the new sear but only by a sliver of a mm. so had to apply a dab of epoxy glue (drying time not included in repair time as i got on with another job)to keep it in place.

refitting in to the trigger mechanism was easy enough used the pop rivet i used to drive out the retaining pin to line it all up before gently tapping the retaining pin in. and a pair of forceps to refit the spring.

reassembled the rifle and a few test shots and all is well

saving me around £85

[Fenton Shooting]

Hi Guys

Sear now comes with Stainless steel bushing included.
Eliminating the need to remove and fit the old one.

Regards
Fentons