Eblag 1500 psi 103 bar 173151310430 maybe the same fitting as the rifle if you remove the gauge
or these again from eblag 39190373844 you would need to know the fitting on the rifle . NPT or BSP.
Hi folks, does anyone know of a pcp guage that is quite low pressure, upto 110-120 bar?
I have a mk2 rapid that has been fast flowed, with a foster qf under the block. I am in the process of re fitting a reg, and will obviously be removing the qf, but there is a gaping hole under the stock, instead of bodging a repair, I thought of putting a guage in there to show reg pressure, so dont really need a 250 bar guage...
Cheers, Andy.
NO LONGER My s410
Eblag 1500 psi 103 bar 173151310430 maybe the same fitting as the rifle if you remove the gauge
or these again from eblag 39190373844 you would need to know the fitting on the rifle . NPT or BSP.
Last edited by bighit; 25-03-2018 at 07:06 PM.
NO LONGER My s410
Cheers buddy, I figured it out by searching that number with 0-9 on the front and then the same on the end...
Andy.
NO LONGER My s410